HobbyKing
BMS-621 HIGH SPEED SERVO 6.4KG / .13SEC / 41G
| Weight | 41grams / 1.45oz |
| Dimensions | 40.5 x 20 x 38.5 mm / 1.60 x 0.78 x 1.54 inch |
| Torque At 4.8V | 6.4kg-cm , 89 oz-in |
| Torque At 6.0V | 7.2kg-cm , 109 oz-in |
| Speed At 4.8V | 0.13 sec / 60° at no load |
| Speed At 6.0V | 0.10 sec / 60° at no load |
5 Reviews
HobbyKing
SMALL AIR OPERATED RETRACTS KIT 2-WAYVALVE
| Total system weight | 129g |
5 Reviews
HobbyKing
KD REPLACEMENT SHAFT KIT 36-__M
,
Replacement shaft kit for KD Motors. Comes with; 2 x ...5 Reviews
HobbyKing
SUPER GOLD PLUS ODORLESS CA GLUE 1/2 OZ (FOAM SAFE)
,
Super Gold Plus Odorless CA 1/2 oz SUPER-GOLD are our ...5 Reviews
HobbyKing
BMS-862DMAX+HS CHAMPION DIGITAL SERVO (MG) 18.8KG / .15SEC / 54G
| Weight | 54g / 1.84oz |
| Dimensions | 40.5 x 20 x 37mm / 1.60" x 0.78" x 1.52" |
| Torque At 4.8V | 18.8kg/cm , 258 oz/in |
| Torque At 6.0V | 21.2kg/cm , 292 oz/in |
| Speed At 4.8V | 0.15 sec / 60° at no load |
| Speed At 6.0V | 0.12 sec / 60° at no load |
5 Reviews
HobbyKing
3D SPINNER FOR DLE111 / DA100 / TMM-53 /TMM-106 / 3W 50-100 (GOLDEN)
| Shaft size | 10mm |
| Dimensions | 55x33mm |
| Bolt hole | 5mm |
HobbyKing
SEAGULL WIRELESS SAILPLANE FLIGHT SYSTEM, 433MHZ
Here are just a few of the features found only on the Glide system:,
Seagull Wireless Sailplane Flight System, 433mhz We are pleased to ...5 Reviews
HobbyKing
NTM PROP DRIVE 35 SERIES ACCESSORY PACK
| Shaft Diameter | 6mm |
| Shaft Length | 27mm |
| Cross Plate Bolt Holes | 42mm |
| Weight | 22.8g (Total) |
5 Reviews
HobbyKing
TURNIGY 540L V-SPEC INRUNNER W/ IMPELLER 810KV
| Diameter of shaft | 5mm |
| Length of front shaft | 13mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 810kv |
| Max current | 50A |
| No load current | 2.1A |
| Internal resistance | 78.0ohm |
| Prop | 13x4, 12x6 |
| Max Current | 23A, 21.5A |
| Pull | 1350g, 1250g |
| Prop | 12x8, 13x6.8 |
| Max Current | 27.2A, 39A |
| Pull | 1700g, 2000g |
| ESC | 60A |
| Battery Type | 3-4S Only |
Dimension:, 36mm x 58mm, 70mm(with shaft), Weight:, 108g (kv810) (not including connectors), Lamination thickness: .,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
HOBBYKING PITTS EPP-CF W/ BRUSHLESS OUTRUNNER
| Fuselage length | 760mm |
| WingSpan | 850mm |
| Servo | 3 x 9g |
| ESC | 20A |
ARF Weight:, 350~400g (with battery), : 2212 1400kV Brushless outrunner, : 8040 slow flyer, Battery:, 2S~3S 1000~1300mah 20C,
Made with crash resistant EPP foam and Carbon Fiber reinforcements ...5 Reviews
HobbyKing
KB45-17XL 700KV BRUSHLESS INRUNNER
| Idle current | 1.6A (8.4V) |
| Max Amp | 48A (36V) |
| Max Watts | 1600W |
| Max volt | 48VWeight |
| Shaft | 6mm |
| Size | 77x45mm |
| Voltage | 36v |
Kv: 700RPM/V,
KB45-17XL 700kv Brushless Inrunner This size motor will fit our ...5 Reviews
HobbyKing
BMS-705MG LOW PROFILE HIGH TORQUE SERVO (METAL GEAR) 6.0KG / .18SEC / 34G
| Weight | 34g / 1.19oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 6.0kg/cm , 83 oz/in |
| Torque At 6.0V | 7.4kg/cm , 112 oz/in |
| Speed At 4.8V | 0.18 sec / 60° at no load |
| Speed At 6.0V | 0.16sec / 60° at no load |
5 Reviews
HobbyKing
KD REPLACEMENT SHAFT KIT 22-__M
,
Replacement shaft kit for KD Motors. Comes with; 1 x ...5 Reviews
HobbyKing
SSV 9314MG 14.7G / 1.9KG / .12SEC PRECISION SERVO
| Item No | SSV-9314MG |
| Weight | 14.7 grams / 0.46oz |
| Dimensions | 23 x 12 x 22.5 mm / 0.92 x 0.47 x 0.87 inch |
| Torque At 4.8V | 1.5kg/cm , 21 oz/in |
| Torque At 6.0V | 1.9kg/cm , 25 oz/in |
| Speed At 4.8V | 0.13sec / 60 deg at no load |
| Speed At 4.8V | 0.12sec / 60 deg at no load |
| Running Current | 185mA |
| Stall Current | 410mA |
| Horn Gear Spline | 25 Segments |
| Connector Wire Length | 160mm (6.29in) |
| Connector Housing | Futaba connector |
| Ball Bearing | One ball bearing on the top |
| Gear Type | Metal Gear |
5 Reviews
HobbyKing
3D SPINNER FOR DLE30 (33X33X26MM) RED
| Shaft size | 10mm |
| Bolt hole | 4.3mm |
5 Reviews