HobbyKing
HOBBYKING KK2.0 MULTI-ROTOR LCD FLIGHT CONTROL BOARD
| Gyro | InvenSense Inc. |
| Auto-level | Yes |
| Input Voltage | 4.8-6.0V |
| AVR interface | standard 6 pin. |
| Signal from Receiver | 1520us (5 channels) |
| Signal to ESC | 1520us |
| Firmware Version | 1.2 |
Size:, 50.5mm x 50.5mm x 12mm, Weight:, 21 gram (Inc Piezo buzzer), IC:Atmega324 PA, Accelerometer:, Anologue Devices Inc., Note:, A user manual is available under the files tab.,
Designed by the Grand father of the KK revolution, Rolf ...5 Reviews
HobbyKing
HOBBYKING I86L MULTI-ROTOR CONTROL BOARD (LITE EDITION)
| The Hobbyking i86L Multi-Rotor Control Board supports | Tri copter |
| Input Voltage | 4v to 6v |
| Input signal | 50hz standard PPM |
| PWM Frequency | 400hz for ESC, 50hz for servos |
| Gyro scale | +/- 500dps, ODR |
| Operating temp | -40° C to 85° C |
| Size | 40mm x 40mm |
Specs:, Weight: 8g,
Hobbyking i86L Multi-Rotor Control Board (Lite Edition) features the same ...5 Reviews
HobbyKing
NX-4005-650KV BRUSHLESS QUADCOPTER MOTOR
| Turns | 24T |
| Resistance | 0.147Rm |
| Idle Current | 0.6A |
| Can size | 45mm |
| Can Length | 10mm |
| ESC Amps | 20A |
| Rated Watts | 130W |
| Weight | 59g |
| Cell count | 3~4S Lipoly |
Kv:650rpm/v, Shaft:, 3mm (Includes Prop saver mount for GWS style props),
If youre serious about your quad-copters performance, then look no ...5 Reviews
HobbyKing
Y-3 FIBERGLASS TRI-COPTER FRAME (KIT)
| Width | 525mm |
| Length | 550mm |
| Frame weight | 460g |
| Flying weight | 900~950g |
Features:, • Unique full-body fiberglass construction, Specs:, Requires:, 28-XX brushless outrunner motor x 3,
Looking for something new in the multi-rotor world? Well here ...5 Reviews
ngHobbies
ROBBE ROXXY BRUSHLESS OUTRUNNER 2827-35
| Normal load | 6–9 A |
| Maximum Load (max 60 sec.) | 10 A |
| Idle Rotation | 760 prm |
| Reccomanded propellers | 10x4.5 (EPP1045), 12x4.5 (EPP1245) |
| Wellenleistung | ca. 110 W |
| Maximum thrust | ca. 820 g |
| Weight (with cable and adapter) | ca. 54-68 g |
| Dimension | 28,8 x 29 mm |
| Bore diameter | 3,17 mm |
Technical Data:, Lithium cell number: 4,
The Roxxy brushless outrunners are more efficient 14 pole high ...HobbyKing
HOBBYKING QUADCOPTER FRAME 680MM
| Height | 57mm |
| Width | 680mm |
| Bolt Holes | 12/16/30mm |
Specs:,
The HobbyKing Quadcopter frame is an inexpensive platform for quadcopter ...5 Reviews
HobbyKing
HOBBYKING X550 GLASS FIBER TILT CAMERA MOUNT
| Camera Mount Width | 113mm |
| Camera Mount Height | 85mm |
| Tilt Angle | 90° Pitch |
| Requires | Standard Servo x 1 |
Specs:, Weight:, 153g (with all hardware),
This is the camera mount for the Hobbyking X550 glass ...5 Reviews
RCTimer
BLACK QUADROTOR SM450 V2 AIRFRAME
| Wheelbase | 17.7in/450mm |
| Weight | 0.65lb/282g(Appr) |
Recommended config (Not Included):, A2208 OR A2212 800KV~1100kv brushless motor x4 sets,
The Best Quality! The Lowest Price! Same DJI F450 Made ...HobbyKing
2728 BRUSHLESS OUTRUNNER MOTOR 1000KV
| Dimensions | 27mm x 28mm |
| Weight | 48g |
| Voltage | 7.4v~11.1v (2s~3s) |
| Max Current | 18A |
| Shaft | 3mm |
Specs:, KV:1000 rpm/v,
2728 Brushless Outrunner Motor 1000kv5 Reviews
HobbyKing
AEROSIM RC MULTI-FUNCTION FLIGHT SIMULATOR SYSTEM
| Minimum System Requirements | • Pentium 3 @ 1GHz |
| Included in box | 1 x Software CD |
Features:, • Airplane Training Program with 63 lessons including control operation, take off, landing, taxi, forced landings, and flight patterns., Required:, Your own radio transmitter,
AeroSIM RC is a full function RC flight simulator system ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 4225-390KV 16POLE MULTI-ROTOR OUTRUNNER
| KV(RPM/V) | 390 |
| Max Surge Watts(W) | 330 |
| Working current | 11 amps |
| Max.current(10s) | 15 amps |
| No Load Current | 0.2 amps |
| Intemal Resistance | 0.24 ohm |
| Dimensions(Dia.xL) | 42 x 24.5 mm |
| Shaft | 6 mm |
| Prop | 12 x 3 - 12 x 6 |
| Weight | 86g |
Spec:, Lipo cells:6s, Number of Poles:16,
Looking for the ultimate power system for your next Multi-rotor ...5 Reviews
HobbyKing
TURNIGY 4206 530KV BRUSHLESS MULTI-ROTOR MOTOR
| Can size | 45mm |
| Motor Mount Holes | 16mm / 19mm |
| Rated Watts | 130W |
| Weight | 68g |
| Cell count | 3~4S |
| Motor wire length | 390mm |
Specs:Kv, :530rpm/v, Shaft:, 3.17mm (includes prop adapter for 5mm prop mounting), :25A,
If you're serious about your multi-rotor's performance, look no further ...5 Reviews
HobbyKing
TURNIGY TALON OCTOCOPTER PLATE SET.
| Weight | 81g (Total) |
| Plate Thickness | 1.5mm |
Specification:, Width:, 130mm (From hole to hole), Material:, 100% Pure woven carbon fibre, Includes:, Turnigy Talon Octocopter Upper and lower main frames only., Requires:, Turnigy Talon V2 Quadcopter kit.,
2 x Turnigy Talon V2 Carbon Fiber Boom 221mm (2 ...5 Reviews
HobbyKing
TURNIGY PLUSH 80A W/ UBEC SPEED CONTROLLER
| Cont Current | 80A |
| Burst Current | 90A |
| UBEC Mode | 3A/5v out |
| Voltage Range | 5.6v ~ 26v |
| Weight | 91g |
| Size | 88x31x14mm |
5 Reviews
HobbyKing
TURNIGY INTEGRATED PCB MICRO-QUAD (KIT)
| Width | 250mm |
| Height | 85mm |
Features:, Light weight design., Specs:, Flying Weight:, 145g (not including RX and battery), Required:, 4 x Turnigy T1811-2900kv,
This tiny yet brilliantly designed Micro-Quad features an integrated PCB ...5 Reviews