HobbyKing
ALUMINUM CARRYING CASE TURNIGY INTEGRATED PCB MICRO-QUAD
| Internal Dimension | 285x285x100mm |
| External Dimension | 295x295x110mm |
| Weight | 1000g |
Specs:,
This is a nicely crafted aluminum carrying case designed specifically ...5 Reviews
HobbyKing
ZEROUAV YS-X6 AUTOPILOT GPS FLIGHT CONTROL SYSTEM
| Operating voltage | 3.7~22.2V |
| GPS/Compass | 55x11mm |
| 2.4ghz WiFi unit | 65x40x14.5mm |
| Weight (w/all components) | Aprox. 212grams |
| Vertical Direction | 0.5m |
| Maximum Tail Rudder angular velocity | 180degree/Sec |
| Maximum Climb Rate | 4M/S |
| Maximum Descent Speed | 4M/S |
| Inlcuded in box | 1x Main Controller |
| http | //www.zerouav.net/product.aspx |
Features:, Ultra precise altitude and GPS position hold, Specs:, MC:92x61x18mm, MU:48.5x40.5x22mm, Way points:, 4 Programmable as standard (Upgradeable), Hover precision (Hover Automatically under GPS mode):, Horizontal direction:2m, Wind resistance:, - 8m/s(17.9mph/28.2km/h), Maximum Tilt Angle:25, *Note:, For more detailed information about upgrade paths and specifications download the user manual located under the "Files" tab below. Or visit the manufacturer's website:,
The ZeroUAV YS-X6 autopilot is a tremendous flight controller system ...5 Reviews
HobbyKing
Q450 GLASS FIBER QUADCOPTER FRAME 450MM - INTEGRATED PCB VERSION
| Width | 450mm |
| Height | 55mm |
| Motor Mount Bolt Holes | 16/19mm |
Features:, Built from quality glass fiber and polyamide nylon., Specs:, Weight:, 280g (w/out electronics), Required:, 4 x 28mm 1000~1200kv (or similar size/kv),
The Q450 is a well thought out 450mm quad frame ...5 Reviews
HobbyKing
HOBBYKING X666 GLASS FIBER QUADCOPTER FRAME 666MM
| Width | 666mm |
| Motor Bolt Holes | 14~30mm |
| Frame Weight | 415g |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X666 quadcopter frame is a high quality glass ...5 Reviews
HobbyKing
TURNIGY 5017 620KV BRUSHLESS MULTI-ROTOR MOTOR
| Can size | 50mm |
| Motor Mount Holes | 16mm / 19mm |
| Suggested ESC | 35A |
| Rated Watts | 290W |
| Weight | 103g |
| Cell count | 3~4S Lipoly |
| Motor wire length | 390mm |
Specs:, Kv:620rpm/v, Shaft:, 3.17mm (includes prop adapter for 5mm prop mounting),
If you're serious about your multi-rotor's performance, look no further ...5 Reviews
HobbyKing
TURNIGY 5014 530KV BRUSHLESS MULTI-ROTOR MOTOR
| Can size | 50mm |
| Motor Mount Holes | 16mm / 19mm |
| Suggested ESC | 30A |
| Rated Watts | 250W |
| Weight | 96g |
| Cell count | 3~4S Lipoly |
| Motor wire length | 390mm |
Specs:, Kv:530rpm/v, Shaft:, 3.17mm (includes prop adapter for 5mm prop mounting),
If you're serious about your multi-rotor's performance, look no further ...5 Reviews
ngHobbies
BLACK ALU RIGGER FOR 400MM MK FRAME
,
This is the Red aluminum rigger only, for the 400mm ...ngHobbies
MIKROKOPTER BRUSHLESS OUTRUNNER MK3638
| •Lithium cell count | 3-6 |
| •Load current | max. 20A |
| •Maximum load current. (60 sec) | 25 A |
| •No-load speed | 770 rpm / V |
| •Recommended Propeller Size | 10" .. 14" |
| •Machanical power | 350 W |
| •Thrust max. | 2200 g |
| •Wire length | about 52 cm |
| •Total weight (without cable) | approx 100g |
| •Dimensions | h=35mm, d=38mm |
| •Shaft diameter | 4 mm |
Technical Data:,
This is a 14 pole brushless outrunner motor with high ...ngHobbies
FLEXIBLE BLUE LED STRIP
| - Length | 10cm (6 x LED) |
| - Voltage required | 12V |
| - Mounting | remove the protective layer from the bottom to stick it to your MK. |
Technical Data:, Package contains:, One strip of 10cm long felxible blue LED strip with 6 LED's on it.,
This is a felxible high output blue LED strip. Usually ...HobbyKing
TURNIGY MULTISTAR 4822-570KV 22POLE MULTI-ROTOR OUTRUNNER
| KV(RPM/V) | 570 |
| Max Surge Watts(W) | 310 |
| Working current | 15 amps |
| Max.current(10s) | 21 amps |
| No Load Current | 0.65 amp |
| Intemal Resistance | 0.092 ohm |
| Dimensions(Dia.xL) | 47.5 x 25 mm |
| Shaft | 6 mm |
| Prop | 12 x 3 - 14 x 5 |
| Weight | 98 g |
Spec:, Lipo cells:4s, Number of Poles:22,
Looking for the ultimate power system for your next Multi-rotor ...3 Reviews
HobbyKing
MULTIWII MICROWII ATMEGA32U4 FLIGHT CONTROLLER USB/BARO/ACC/MAG
| Main chip | ATmega32U4 |
| CPU speed | 16MHz |
| Dimension | 50x50x16mm |
| Weight | 14g |
Features:, • USB on chip (no FTDI or UART needed), Specs:, Flash size:, 32kB (3.3kB are taken by the Bootloader), Input:, 6 x high-res RX inputs (2 AUX channels), Output:, 6~8 motor outputs (motor 1-6 are 11-bit PWM),
The MicroWii is a complete multi-rotor flight controller. It is ...5 Reviews
HobbyKing
HOBBYKING X650F GLASS FIBER QUADCOPTER FRAME 550MM
| Weight | 598g (frame only) |
| Width | 550mm |
| Height | 265mm |
| Motor Bolt Holes | 16~30mm |
Specs:, Ground clearance:, 155mm (bottom of frame), 185mm (camera mount rails), Required:, Your own 4 channel transmitter and receiver,
The Hobbyking X650F is a high quality folding-arm quadcopter frame ...5 Reviews
ngHobbies
MIKROKOPTER BASIKSET HEXA 2
| http | //www.nghobbies.com/cart/index.php?main_page=page&id=23 |
| Note | There is NO battery included with this kit. |
| http | //www.mikrokopter.de/ucwiki/en/MK-Hexa |
| http | //www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started |
| http | //www.mikrokopter.com/ucwiki/en/FlightCtrlManual |
| http | //www.mikrokopter.com/ucwiki/en/BrushlessCtrl |
| http | //www.mikrokopter.com/ucwiki/en/SerCon |
| http | //www.mikrokopter.com/ucwiki/en/ElectronicConnections |
| http | //www.mikrokopter.com/ucwiki/en/MikroKopter-Tool |
| http | //www.mikrokopter.de |
| http | //forum.mikrokopter.de/forum-17.html |
NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,
pre-order only . We will order this when you place ...HobbyKing
TURNIGY MULTISTAR 20 AMP MULTI-ROTOR BRUSHLESS ESC 2-4S (OPTO)
| Constant Current | 20A |
| Input Voltage | 2-4 cells Lipoly |
| BEC | None (OPTO) |
| PWM | 8 KHz |
| PCB Size | 41mm x 24mm |
| Weight | 25g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Poles Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 30 AMP MULTI-ROTOR BRUSHLESS ESC 2-4S
| Constant Current | 30A |
| Input Voltage | 2-4 cells Lipoly |
| BEC | Yes (Switching |
| BEC Output | 5.5V/4A |
| PWM | 8 KHz |
| PCB Size | 41mm x 24mm |
| Weight | 29g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Poles Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews