RCModelScout.

HobbyKing

SCM 3213 1750KV BRUSHLESS OUTRUNNER

Kv: 1750rpm/v,

HobbyKing

D-MG16 METAL GEAR 2.9KG/.08SEC/18.8G

HobbyKing

GWS NARO+D 10G DIGITAL SERVO

HobbyKing

TURNIGY NANO-TECH 1800MAH 4S 25~50C LIPO PACK

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec. Capacity: 1800mAhVoltage: 4S1P / 4 Cell / 14.8VDischarge: 25C Constant / 50C BurstWeight: 207g (including wire, plug & case)Dimensions: 117x36x28mmBalance Plug: JST-XHDischarge Plug: XT60 ConnectorSuited to the following models: RAVE450 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy disc,

HobbyKing

NTM PROP DRIVE SERIES 35-36A 1400KV / 550W

Specs:, Model:, NTM Prop Drive 35-36A 1400, Kv:1400rpm/v, Turns:7, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 8x4 - 14.8v - 621W - 42A,

HobbyKing

TURNIGY 500 H3126 BRUSHLESS OUTRUNNER 1300KV

Turns: 5, Kv: 1300rpm/V,

HobbyKing

TURNIGY 450 H2218 BRUSHLESS OUTRUNNER 2100KV

Turns: 6, Kv: 2100rpm/V,

HobbyKing

TURNIGY NANO-TECH 3300MAH 4S 25~50C LIPO PACK

: 3300mAh, : 4S1P / 4 Cell / 14.8V, : 25C Constant / 50C Burst, : 337g (including wire, plug & case), : 147x44x26mm, : JST-XH, Discharge Plug:, 4mm bullet-connector,

HobbyKing

GWS NARO SUPER 19G / 3.6KG / .07SEC DIGITAL SERVO

HobbyKing

GWS PARK HPX SERVO 19G/.05SEC/3.6KG (JR PLUG)

HobbyKing

TURNIGY DIGITAL HIGH TORQUE BEARING SERVO 16.2G/3.1KG/.16SEC

HobbyKing

TURNIGY NANO-TECH 4000MAH 4S 45~90C LIPO PACK

: 4000mAh, : 4S1P / 4 Cell / 14.8V, : 45C Constant / 90C Burst, : 485g (including wire, plug & case), : 168x49x29mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:, Hirobo Lepton EX, HIROBO SDX-EP(4S x 2),

HobbyKing

D922MG DIGITAL METAL GEAR SERVO 1.8KG/ 12G/ 0.07SEC

Operating Speed:, 0.09sec.60º/ 0.07sec.60º,

HobbyKing

NTM PROP DRIVE SERIES 35-36B 1400KV / 495W

Specs:, Model:, Kv:1400rpm/v, Turns:7, Max Power:, 495W @ 12v (3S) / Waiting test results (4S), Bolt thread:M3, Suggested Prop:, Prop test data coming soon!,

HobbyKing

TURNIGY 450 H2218 BRUSHLESS OUTRUNNER 3550KV

Kv: 3550rpm/V,