RCModelScout.

RCTimer

B6 Digital Balance Charger & Discharger Red

Features :::ListPrice : $ 59.99, Score : 37, Write a Review,

Specification
Operating voltage  DC 11~18 volts
Idling current  approx. 100mA
Charge/discharge power  max. 80/8W
NiCd/MH  1~15 cells
LiIo/LiPo/LiFe  1~6 series
 Pb  2~20V
Charge current  0.1 to 5.0A
Discharg current  0.1 to 1.0A
No. of cycle  1 to 5 times
Battery data memory  up to 5 data   User's setting-up parameters
 Lithium battery voltage type  LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
 NiCd Delta-peak voltage sensitivity  5 to 20mV
 NiMH Delta-peak voltage sensitivity  5 to 20mV
 Battery temperature cut-off  20 to 80C or OFF
 Waste time between charge/discharge  1 to 60 min.
 Trickle charge mode  ON/OFF, up to 200mA
 Integral timer limit for safety  10 to 720 min.or OFF
 Maximum charging capacity limit for safety  10 to 9990mAh or OFF
 Key beep and buzzer sound  ON/OFF
 Input power low alert  10 to 11V  
-  Operating software   Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.   -  Individual voltage balancer for Lithium batteries   B6V2 has an individual cell voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.   -  Accept various types of Lithium battery  B6V2 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.   - Lithium battery 'Fast' and 'Storage' mode   You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage.   - Maximum safety    Delta-peak sensitivity : The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)    Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.   Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.    -  Data store/load   For users convenience it can store maximum  5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.    -  Cyclic charging/discharging   Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.   -  PC based analysis using USB communication   For technical expert, B6V2 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.   - Robust outer aluminum case   High-quality aluminum case is durable and very efficient to cool out the internal heat

Found 11 years, 9 months ago