SDSHobby
DC Peak Charger Special for Nimh/Nicd Battery
| Rated Voltage | DC12-18V |
| Rated Current | 1600mA |
| Current | 1600mA(2000mA Max) |
| Voltage | 3-12V (MCU checks NiMh/NiCd cells and sets the output voltage automatically. |
| Important | For 8 cells battery,the input voltage should be higher than 13.5V) |
| Trickle Current | 100mA |
Input:, Output:,
*MCU checks Nimh/Nicd cells and sets the output voltage automatically lmportant;
For 8 cells battery,the input voltage should be more than 13.5V.
*Two color LED is easy to know the charger status.
Connect input power,LED illuminate Red and green infile,it means the power and
the charger are in goood condition.
Battery un-connected or full-charged,LED illuminate Green.
Charging finish,trickle chargine status,LED illuminate Green.
*Please pay attention Not to connect the battery with wrong plarity.
*Connect battery or power will repeat the whole charging procedure.
*If the LED tuns from Red to Green again and again slowly,the charger enters testing
mode,At this time,output isnot stopped,Must disconnect the power or battery,then
connect it again,Otherwise,it will cause serious problem.
Check price and availability
Found 11 years, 8 months ago