RCModelScout.

RCPlanet

DuraTrax IntelliPeak ICE DC Competition Charger DTXP4170

, Battery Types, # of cells:, 1-10 Nickel Cadmium cell (1.2-12V), 1-10 Nickel Metal Hydride cells (1.2-12V), 1-4 Lithium Ion or Lithium Polymer cells (3.6-14.8V), Input Voltage:, 11-15V DC, Battery Capacity Range:, 100-9900mAh, Fast Charge Current:, .1-8A Linear, Reflex, Impulse and 4-step, Fast Charge Termination:, Peak Detection for NiCd and NiMH "Constant Current/Constant Voltage" for Li-Ion/LiPo, optional thermal cutoff for all battery types, Peak Sensitivity:, 0-25mV adjustable, TRICKLE Charge Current:, 0-500mA (n/a for Li-Ion/LiPo), Discharge Current:, .1-10A adjustable, Discharge Cut-Off Voltage:, .8-1.1V per cell NiCd & NiMH, Discharge Cut-Off Voltage:, 2.5-3.7V per cell Li-Ion/LiPo, Temperature Cut-Off Range:, 50-132°F, Cycle Count:, one to ten (n/a for Li-Ion/LiPo), Cycle Cool-Off Delay:, 1-30 minutes, adjustable, Battery Memories:, 10, Display Type:, 8x21 LCD (168 characters max), Graphical Displays:, Graphs Charge and Discharge Voltage curves, Output Connectors:, Banana jacks, Motor Break-in:, 1-8V selectable, 1-120 minutes, 10A constant, Case Size:, 5.5" x 1.8" x 5.9" (140x45x150mm), Weight:, 21oz (605g), ,

This is the DuraTrax IntelliPeak Ice Competition Battery Charger, Discharger and Cycler.
Features:
Handles 1-10 NiCd or NiMH cells, and 1-4 Lithium Ion (Li-Ion) or
Lithium Polymer (LiPo) cells
Wide adjustable current ranges for Fast Charge (.1A-8A) and Discharge (.1A-10A) are ideal for electric cars, trucks and boats
Four Charge modes: Linear, Reflex, Impulse, and 4-step
"Constant Current/Constant Voltage" Charge method for Li-Ion/LiPo batteries
Reverse Polarity Protection
Peak Detection with adjustable sensitivity for NiCd & NiMH batteries
0-500mA adjustable TRICKLE Charge current for NiCd and NiMH
.8V-1.1V adjustable Discharge cut-off voltage for NiCd and NiMH
2.5V-3.7V adjustable Discharge cut-off voltage for Li-Ion/LiPo
Performs 1-10 cycles (NiCd and NiMH only)-retrieves data for 10 full cycles
Stores info for up to 10 batteries in memory by custom names for easy recall and charger set-up
LCD screen shows 8 lines of data and 21 characters per line
1-8V adjustable output, time adjustable from 1-120 minutes and
10A Constant Current (30A surge) for motor break-in
Also breaks-in electric motors and operates commutator lathes
Includes:
One DuraTrax IntelliPeak ICE charger w/ banana jacks on output lead, alligator clip charge leads, Tamiya style charge lead, input lead with pre-installed banana plugs, large alligator clips, and instruction manual
Requires:
12V DC power from a Power Supply or automotive battery or
Hobbico 12V Power Supply (GPMP0901) or
Rivergate 15A DC Bulldog Power Supply
To achieve ICE's absolute maximum output power capabilities the
DC power source must be capable of delivering at least 15A while maintaining 12V DC (although 12.5A is enough for most functions).
Charge Leads depending on type of battery;
DTXC2220  Charge Lead Banana to Standard
DTXC2221  Charge Lead Banana to DNS Male
DTXC2222  Charge Lead Banana to Traxxas
DTXC2223  Charge Lead Banana to Mini Plug
HCAP0101  Futaba J Tx/Rx Charge Leads NO 9VAP
HCAP0102  Futaba J Tx/Rx Charge Leads 9VAP ONLY
HCAP0105  JR Tx/Rx Charge Leads
HCAP0106  Hitec/Airtronics Z Tx/Rx Charge Leads
GPMM3149  Charge Lead Banana/Deans Micro

Found 11 years, 8 months ago