RCPlanet
DuraTrax Onyx NiMH 7-Cell 8.4V 5000mAh Hump Battery & DuraTrax Onyx 230 Charger DTXC2070-DTXP4230
| Capacity | 5000mAh |
| Rated Voltage | 8.4V |
| Min. Discharge Voltage | 6.3V |
| Maximum Recommended Charge Current | 5 amps |
| Discharge Lead | 14AWG 2.7" (70mm) long wire w/Traxxas connector |
| Pack Dimensions | 5.3 x 1.8 x 1.6" (135 x 45 x 42mm) |
| Weight | 18.3 oz (520 g) |
| Number of Welds per Connection | 6 spot welds |
| Cell Size | Sub-C |
| AC Input | 110V AC 60Hz |
| DC Input | 11-15V DC, built-in lead with alligator clips |
| Battery Types | 1-8 NiCd or NiMH cells (1.2-9.6V) 1-3 cell LiPo, or LiFe (3.7-11.1V) |
| Battery Capacity Range | 50-9900mAh |
| Fast Charge Current | 0.1A, 7.0A linear adjustable (50W max., 2C limit for Lithiums) |
| Fast Charge Termination | Peak detection for NiCd/MH, CC/CV for Lithium |
| Fast Charge Safety Timer | OFF-300 minutes |
| Peak Sensitivity | 3 - 20mV adjustable |
| Trickle Charge Current | Automatic 1/20 fast charge setting (0-250mAh) |
| Input Control | 4-pushbuttons |
| Setup Tones | ON/OFF |
| Display Type | 2x8 reversed LCD with backlight |
| Protective Devices | Solid-state reverse polarity and current overload |
| Case size | 6.0 x 5.28 x 1.69 inches (153 x 134 x 43mm) |
| Weight | 23.5oz (666g) |
, Battery DTXC2070:, Number of Cells in Series: 7, Charger DTXP4230:, Battery Memories: 10, Audible Melodies: 5, , ,
DuraTrax Onyx NiMH 7-Cell 8.4V 5000mAh Hump Battery with Traxxas Plug & DuraTrax Onyx 230 Charger
This is the DuraTrax Onyx NiMH 7-Cell 8.4V 5000mAh Hump Battery, ideal sport pack for cars, trucks and boats. This DuraTrax battery is prewired with a Traxxas high current connector and comes with a DuraTrax Onyx 230 AC/DC Peak Charger with Backlit LCD combo.
The DuraTrax Onyx 230 Charger's wide output current and voltage range makes it equally useful for 1/32 scale micros and up to 1/8 scale electrics, as well as transmitter packs and nitro receiver packs. The DuraTrax Onyx 230 also charges LiPo, Li-Ion, and LiFe packs.
Charger Features:
Charges 1-8 cell NiCd or NiMH (1.2 - 9.6V) cells and 1-3 cell LiPo
Li-Ion or LiFe (3.7 - 11.1V) cells
Fully adjustable charge currents and multi-chemistry adaptability for a wide range of applications
Custom CC/CV charge algorithm carfully charges Lithium Polymer, Lithium-Ion or Lithium Ferrite-Phosphate (A123) batteries fully and safely
Push button controls and audible tones for easy setup and control
Precise peak detection with automatic TRICKLE charge fills packs completely for optimum voltage and run time, 3 - 20mV adjustable peak detection helps to customize charger-to-battery performance
Built-in banana jacks allow connection with many common charge adapters, an adapter with Kyosho type plug is included
Built-in fan for long lasting performance
DC power lead with alligator clips easily connects to many 12V DC power sources
Custom reversed LCD with backlight for easy viewing in any condition shows input and output voltges, peak voltage, charge current, charge capacity and time and more
Small lightweight switching AC power supply delivers up to 7 amps of charge current
Solid state reverse polarity and current overload safety devices
FIVE YEAR warranty
Requires
: Charge Leads depending on type of battery:
RCE2475 Racers Edge Squid Charging Adaptor
DTXC2221 Charge Lead
Banana to DNS Male
DTXC2222 Charge Lead
Banana to Traxxas
DTXC2223 Charge Lead
Banana to Mini Plug
HCAP0101 Futaba J
Tx/Rx Charge Leads NO 9VAP
HCAP0102 Futaba J
Tx/Rx Charge Leads 9VAP ONLY
HCAP0105 JR Tx/Rx
Charge Leads
HCAP0106
Hitec/Airtronics Z Tx/Rx Charge Leads
GPMM3149 Charge Lead
Banana/Deans Micro
**
Attention International Customers-
**
**The AC input voltage of this charger is 110V.**
**230 refers only to the model number.**
Check price and availability
Found 11 years, 8 months ago