SDSHobby
Efuel RC Model AC 220V DC 6-15V 20A Adaptor Power
| Input Voltage | 220-240V AC (Part No. PSU20ADU, PSU20AU) |
| Input AC Frequency | 50Hz/60Hz |
| Output Voltage | 6-15V DC±0.5V |
| Output Current | 20A±1A |
| Current Overload Protection | ≤21A 500MS |
| Input Fuse | 220V AC 3.15A Fuse |
| LCD Display | Voltage Precision ±0.3V; Current Precision ±0.3A |
| Output Voltage Ripple | L<100MV |
| Power Efficiency | >80% |
| Power Factor | >0.7 |
| Over Temperature Protection | <100°C |
| Cooling Method | Cooling Fan |
| Operating Temperature | 0-40°C |
| Operating Humidity | 0-90% |
| Dimensions (L*W*H) | 184.5*92*50mm |
| Net weight | 908g |
Features:, , Introduction:, , Kindly Remark:,
Specifications
:
Two 15 volts power outputs, up to 20 amperes
Output voltage adjustable 6-15V(Part No. PSU20ADU & PSU20ADE only)
Large LCD indicates voltage and current amperes output (Part No. PSU20ADU & PSU20ADE only)
Smart cooling fan
Over temperature protection
Over loading protection
Short circuit protection
Your eFUEL switching DC Power Supply is designed to use household AC power source to power equipments that required DC power. The eFUEL converts standard household power 110-120V AC or 200-240V AC to 6-15V DC power and can supply up to 20 amperes of continuous power.
To use the power supply after you connect the device to it, set POWER to turn it on with the red light illuminated. If the power supply's POWER switch does not light, check all connections and confirm the wall AC outlet has power. If the outlet has power, set POWER to OFF, reduce the load (by using a device that does not require more than20 amps), then set POWER to ON. Your power supply's overload protection circuit automatically shuts down the power supply when it is overload and resets by turning POWER to OFF.
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
Check price and availability
Found 11 years, 7 months ago