RCModelScout.

HiModel

Ezrun-35A Brushless ESC + 13T/3650 (3000KV) Motor + Pro-card Combo for 1/10 On-road Car Sportful

, , , , , , Specifications:, , , , , , , , , , , * The speed controller and program card in the combo are V2 since 29/06/2009., , ,

Features:

This combo is specially designed for 1/10 and 1/12 scale ON-ROAD car.
Main applications:
1) R/C enthusiasts to upgrade to brushless and experience incredible power and starting torque, minimal maintenace and longer runtimes;

2) "RTR" (Ready To Run) applications for manufacturers;
3) Club race for stock equipments (Same controllers and/or same motors) ;
The Combo includes the following items:
● eZRun-35A-SL brushless ESC: 1pcs
● 9T /10T /12T / 13T sensorless brushless motor: 1pcs
● Program card for car ESC: 1pcs
● Cooling fan: 1pcs

1 Specification of The ESC

1.1
Output:
● eZRun-35A-SL: Continuous current 35A, burst current 190A.
1.2
Input:
4-9 cells NiMH/NiCd or 2-3 cells LiPo.
Note
1
1.3
BEC Output:6V/1.5A.
1.4
Resistance:
● eZRun-35A-SL: 0.0015 Ohm.
● eZRun-25A-SL-H: 0.005 Ohm.
1.5
Motor Supported:
Sensorless Brushless motor.
1.6
Suitable Brushless Motor:Note2
●
eZRun-35A-SL: >=9T (Size: 3650-M)

1.7
Suitable Car:●
eZRun-35A-SL: 1/10, 1/12 on-road car for sportful race.

1.8
Size:
31.5mm(L) * 27.5mm(W) * 24mm(H).
1.9
Weight:30g(Without wires).

Note1:

For 4-6 cells NiMH or 2S Lipo: You needn't change the cooling fan coming with the ESC;

For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);

Note2:
The values of "T" number is tested under the following conditions:
a) The input is a 6 cells NiMH battery;
b) The ESC is equipped with a cooling fan.

2 Specification of The Motor

Model

KV

Diameter
mm

Length
mm (Without Shaft)

Shaft
mm

Shaft Length
mm

Weight
g

9T/SL-3650M

4300

35.8

50.0

3.17

15

165

10T/SL-3650M

3900

35.8

50.0

3.17

15

165

12T/SL-3650M

3300

35.8

50.0

3.17

15

165

13T/SL-3650M

3000

35.8

50.0

3.17

15

165

3 Features

3.1

Compatible with all sonsorless brushless motor.

3.2
Use top quality electronic components to enhance the current endurance ability of the ESC.

3.3

Excellent start-up, acceleration and linearity features.

3.4
With 2 running modes (Racing mode and Forward/Backward mode).

3.5

With 4 steps of maximum reverse force adjustment.

3.6

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

3.7 With
4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".

3.8

Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.

3.9 With

8 steps of timing adjustment to get the best compatibility with various of motors.
3.10

Easily program with only one button and compatible with pocket-sized program card.
3.11 Motor uses top quality materials:
● Aluminium shell (case)
● High quality magnets
● Copper wires of high temperature endurance
● Good quality bearings.
3.12 Dustproof design for the motor.
3 Programmable Items (Click the following picture to enlarge it)

Includes/Requires:

Includes:1 x ESC
1 x ESC colling fan (pre-installed)
1 x brushless motor
1 x program card for ESC
1 x Instruction manual (English)

Found 11 years, 8 months ago