SDSHobby
Flymentor 3D Drifting-resistant Balancer Setup Card for KDS450/500/550
CCD | 30.5mm*16mm*16mm |
Specification:, Working Voltage:, 4.8-6.0V, Working Current:, 55mA (5V), Dimensions:, Central Controller:, 45.5mm*32.5mm*19.5mm, Sensor:, 30mm*30mm*16mm, Operating Temperature:, -0 Celsius degree--+40 Celsius degree, Allowable Peak Rate of Rotation in Mode of Balancing and Location:, Movement of Aileron and Elevator:≤, Switching of Tail Rotor (in the case of external gyro):≤, Functions:, Warm Tips:,
00 degree/ s
400 degree/ s
It can be applied to KDS balancer (KDSF001), and KDS450/500/550
/600/700/250 Helicopter equipped with KDSP balancer.
This setup card can balance all horizontal movement, including attitude stabilization, speed control and location.
The unique CCD sensor can seize the ground picture and compare them, and protect the helicopter from drifting effectively.
It can adjust the working condition of balancer through AUX channel, and switch between mode of location and mode of balancing.
It is equipped with built-in AVCS gyro and swashplate mixed controller.
It can control the gain and mode of gyro through GEAR channel.
It supports helicopters with 3S 120 degree/3S 140 degree/ 4S 90 degree/ 4S 90 degree +45 degree swashplate.
It can conduct horizontal movement on inverted flight of helicopters
If your FM/PPM remote control equipment is out of control, the balancer will immediately return the aileron, elevator and tail servo to the middle, and the paddles’ distance will remain as the signal indicates finally. And the balancer will switch to location mode with 70% gain.
It can compatible with other systems except VISTA 64 bit.
Check price and availability
Found 11 years, 7 months ago