RCModelScout.

LowPriceRC

HYPERION EOS1210I

,

802
HYPERION EOS1210I Model Number: HP-EOS1210I
The EOS 1210i is an
extremely powerful (180W, 10A max), versatile,
easy-to-use charger with special features for speed charging lithium
packs up to 12S! 2C rates are possible - in addition to Terminal
Capacity Selection - allowing you to charge and fly lithium polymer
packs* in as little as 27 minutes. NiCd and NiMH packs of up to 30
cells, and lead-acid batteries to 12V are also supported. Output Charge
Cord/Connector set included ($3.50 value)
Monitor the individual cell voltages on the LCD screen of EOS1210i
while you balance your lithium packs with LBA 10 and optional cable
#HP-EOSLBA10-DPC. Network two LBA 10 together with NET Adapter pack
#HP-EOSLBA10-MSC, and you can charge two packs of same cell type and
capacity (such as 6S and 6S) at the same time, and every cell in both
packs will be balanced to the other when charging is done, for packs
from 7S to 12S!
Charge Spec:
* Input Voltage: 12-15V DC
* Battery Types, # of cells: 1-30
Nickel-Cadmium cells (1.2-36.0V NiCd)
1-30 Nickel-Metal
Hydride cells (1.2-36.0V NiMH)
1-12 Lithium-lon or
Lithium-Polymer & A123 cells cells (3.7v-44.4V Li-lon/Li-Po)
* Charge current: 0.1-10.0A (2C max for
Li-lon/Poly)
* Fast charge termination: Peak
detection for NiCd and NiMH "
*Constant current / constant voltage" for Li-lon
/ Li-Po
* Discharge current: 0.1-5.0A adjustable
* Cycle delay: 1-30 minutes adjustable
* Battery memories: 10
* Display type: 2 line, 16-character LCD
with Blue Backlight
* LCD monitoring of individual Li-poly
cell voltage with optional LBA10 balancer
* Output connectors: banana jacks (
adapter leads included)
* Built-in Thermostat-Controlled Cooling
Fan
*Optional thermal cutoff for all battery types
HP-EOS1210I-SEN (optional) is the Temperature sensor for EOS1210i. It
plugs into a dedicated port and allows you to specify a pack
termperature at which charging will be stopped, and/or monitor pack
temp during the charge.

Found 11 years, 9 months ago