HiModel
HiModel FLY Seires 4 - 10S 100A Electric Speed Controller for Helicopter Type HV Heli-100-OPTO
| Type | HV Heli-100-OPTO |
| · Weight | 326 g / 11.5 oz |
| · Size | 151 x60 x30mm |
| · Constant Current | 100A |
| · Max Current | 120A (for ten seconds) |
| · PWM | 8/16/32 KHz |
| · Input | 4 to 10 Li-Po or 10 - 32 Ni-Mh/Ni-Cd. |
, , , , , , Specifications:, , , , , , , , , , , · BEC:NO, *This ESC is OPTO version and does not have BEC output, which means you need a separate RX battery pack or external BEC unit to power the receiver and servos., , ,
Features:
HiModel FLY Seires Brushless Speed Control With Governor function for Helicopter
● Easy to configure and operate, special designed for electric helicopters, working voltage 4 to 10 Li-Po or 10 - 32 Ni-Mh/Ni-Cd.
● Prog-box configure capable, can easily set up variety parameters.
● By prog-box, you can set the cut-off voltage between 2.0-3.2V per cell at 0.1V incremental. *
● Timing mode (0-30)degree, at one degree interval *
● PWM: 8/16/32 KHz
● 3 throttle curve modes: LOGARITHMICAL LINEAREXPONENTIA, you can feel different throttle response styles by using different throttle modes *
● 3 accelerating response control modes, SOFT / MEDIUM / HARD. Setup in conjunction with throttle curve modes, you can gain your own ideal throttle curve. *
● Auto detect and setup throttle range, and you can also set to a fixed amount manually by Prog-box. *
● Soft start and governor function.
● Under governor mode, you can set motor poles to 2-4, 6-10, 12-14 *
● Motor reverse function, avoid the annoyance of swapping motor wires.
● Lost signal protection: cut off after 3 seconds when lost signal.
Note: features marked with ‘*’ can only be configured by Prog-box.
Includes/Requires:
Includes:1 x ESC
Check price and availability
Found 11 years, 8 months ago