HiModel
HiModel GX Seires 125A 3-7S Brushless Electric Speed Controller W/BEC Type GX-125A-BEC
| Type | GX-125A-BEC |
| · Weight | 86g / 3.03 oz |
| · Size | 65 x 40 x 15 mm |
| · Constant Current | 125A (under good cooling condition) |
| · Max Current | 150A (for ten seconds) |
| · BEC | switch mode 3-8S, 5A |
| · Cut-off | 3.0V per cell for Lipo |
| · PWM | 8 Khz, 16Khz |
| · Input | 5 - 20 Ni-Mh/Ni-Cd or 3 - 7 Lipo (6-30V) |
| option 1 | auto set-up throttle range |
| option 2 | fixed throttle range |
| option 3 | high acceleration (hard start) |
| option 4 | low acceleration (soft start) |
| option 1 | no brake |
| option 2 | light brake |
| option 3 | medium brake |
| option 4 | heavy brake |
| option 1 | default running direction |
| option 2 | reverse runing |
| option 3 | hard brake |
| option 4 | soft brake |
| option 3 | 15° |
| option 4 | 30° |
| option 2 | 16K |
, , , , , , Specifications:, , , , , , , , , , , Setting:, 1. Cut-off main power of speed controller, switch on the transmitter and receiver., 2. Move throttle stick to up position (full open), 3. Switch on the main power of speed controller, 4. Wait for beeps of the speed controller, Options of set up:, 1. Cut-off voltage, option 1. Ni-Mh battery, auto setup, option 2. cut-off for 7S lipo, option 3. cut-off for 6S lipo, option 4. cut-off for 5S lipo, option 5. cut-off for 4S lipo, option 6. cut-off for 3S lipo, 2. Start-up mode, 3. brake, 4. Running features, 5. Timing modes, option 1: 2°, option 2: 7°, 6. PWM modes, option 1: 8K, , ,
Features:
●Auto detect the cells and type of batteries, and set the cutting-off voltage accordingly, 3V per cell for lipo, and 0.8V/cell for Ni-Mh/NiCd batteries.
●Safe start, it will not start up when throttle at wrong position.
●Over-temperature protection: The ESC will stop working when surface temperature is over 110℃.
●Lose signal protection: The ESC will stop when lost control signal for over 1 second.
Check price and availability
Found 11 years, 7 months ago