HiModel
HiModel Professional Series 60A / 80A Electric Brushless Speed Control Type Professional-60A
| Type | Professional-60A |
| Output | Continues 60A, Burst 80A up to 10 Secs. |
| Voltage Input | Lithium |
| Max Speed | 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM |
| Weight | 60g / 2.12oz |
, , , , , , Specifications:, , , , , , , , , , , BUILT-IN BEC (Battery Elimination Circuit) Output：3A @ 5V；, Size：70mm x 31mm x 15mm(length x width x high), Click here for, CE Certificate, All the HiModel electric speed controllers (ESC) are comply with RoHS standard, the certificate is under processing., , ,
Features:
■ Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
■ Seperate PCB for control circuit and MOSFET circuit: adiabatic air gap between control circuit PCB and MOSFET circuit PCB reduces the heat exchange form MOSFET to control circuit, so the ESC works more reliable.
■ Extreme low resistance, super current endurance.
■ Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.
■Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.
■ Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.
■ Programmable Items:
●Brake Settings：brake enabled / brake disabled, default is brake disabled
●Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.
●Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.
●Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.
1) For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.
2) For Ni-xx battery, low / medium / high cutoff voltages are 0%(ie. never cut off )/45%/60% of the startup voltage. For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V.
●Startup mode: normal / soft / super-soft, default is normal startup.
●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.
■ Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.
Includes/Requires:
Includes:1 x ESC
1 x English Manual
Check price and availability
Found 11 years, 8 months ago