SDSHobby
Large Current Switch Harness W/Battery Checker
| Working Voltage | 3.5V-6V |
| Monitoring voltage | 5V/6V programmable |
| Working current | <30mA |
| a. 5V monitoring setting mode | the LED on the far left will blink 4 times, turn off |
| b. 6V monitoring setting mode | if you do not turn off the switch while the far left |
Default monitoring voltage: 5V, Instruction manual:, 1. Meaning of the LED status:, When the switch is turned on, the LED will light as following:,
Silicon wire for large current.
the switch while it is blinking, and switch it on again after 2 seconds, the voltage
checkerwill be set to 5V monitoring mode;
LED is blinking, and then the LED on far right will start to blink, turn off the switch
while the LED on right side is blinking, the voltage checker will be set to 6V mo-
nitoring mode;
c. Next, the 6 LED lights will light up and turn off in turn back and forth for auto-
checking.
d. Then the LED on the far left or far right will blink 3 times quickly, to show the
current monitoring mode (the far left LED blink means 5V monitoring, and the far
right LED blink means 6V monitoring)
e. Then this unit will start voltage monitoring, and the LED indicating the current
voltage will light up. (for 5V monitoring, read the upper line of voltage scale, and
read the lower line for 6V monitoring)
Check price and availability
Found 11 years, 7 months ago