Hobby-Lobby
Quattro B6 - Four 50W Balance Chargers In One
Jason Says: "This is the charger I use the most. I hate having to lug around several charges and dealing with all the wires and connections. That all went away with the Quattro. One box, 4 batteries at a time. That's what I'm talking about." Tired of charging one battery at a time? Now charge four! 9" x 6" x 2-1/2". Compact yet powerful 4-in-1 charger. This charger allows you to plug 4 batteries into one charger simultaneously and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. The batteries do not need to have the same configuration or chemistry. You can connect different types (NiMH, NiCd, LiPo, LiFe, Pb) of batteries into any of the charging ports. No more staying up late charging batteries. The unit consists of 4 independent microprocessor controlled 50-watt chargers. Each can charge any of the available battery types. Each of the chargers can balance-charge Lithium batteries up to 6 cells. Requires a DC power source, either a 12V DC car battery or an AC/DC power supply greater than 200 watts. The balance port connection pins are set at 2.5mm pin spacing and you can balance any pack that has a 2.5mm spacing balance connector, without using an adapter. The charger comes with 2 adapters for balancing: one for Thunder Power lipo packs (2.0mm pin spacing) and one for JST XH batteries. Quattro B6 Charger Instructions Quattro B6 Charger Specs: Operating Voltage Range: DC 11 to 15 Volt Power Source: 12V DC (car battery - AC/DC Power Supply (>200 Watts) Charge Power: 50 Watts, current is regulated accordingly - eg. 11.1V battery: charge current approx. 4.5A, 22.2 V battery: charge current approx. 2.2A Discharge Power: 5 Watts, current is regulated Cell Count: 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, 1-10 Lead-Acid cells (2-20V) Current Drain Balancing (LiPo): 300mA/cell Charge Termination (NiCd/NiMH): Automatic, negative Delta Peak method Charge Termination (Lead-Acid/Lithium): Automatic, voltage-dependent, CC-CV process Dimension,
Jason Says: "This is the charger I use the most. I hate having to lug around several charges and dealing with all the wires and connections. That all went away with the Quattro. One box, 4 batteries at a time. That's what I'm talking about." Tired of charging one battery at a time? Now charge four! 9" x 6" x 2-1/2". Compact yet powerful 4-in-1 charger. This charger allows you to plug 4 batteries into one charger simultaneously and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. The batteries do not need to have the same configuration or chemistry. You can connect different types (NiMH, NiCd, LiPo, LiFe, Pb) of batteries into any of the charging ports. No more staying up late charging batteries. The unit consists of 4 independent microprocessor controlled 50-watt chargers. Each can charge any of the available battery types. Each of the chargers can balance-charge Lithium batteries up to 6 cells. Requires a DC power source, either a 12V DC car battery or an AC/DC power supply greater than 200 watts. The balance port connection pins are set at 2.5mm pin spacing and you can balance any pack that has a 2.5mm spacing balance connector, without using an adapter. The charger comes with 2 adapters for balancing: one for Thunder Power lipo packs (2.0mm pin spacing) and one for JST XH batteries. Quattro B6 Charger Instructions Quattro B6 Charger Specs: Operating Voltage Range: DC 11 to 15 Volt Power Source: 12V DC (car battery - AC/DC Power Supply (>200 Watts) Charge Power: 50 Watts, current is regulated accordingly - eg. 11.1V battery: charge current approx. 4.5A, 22.2 V battery: charge current approx. 2.2A Discharge Power: 5 Watts, current is regulated Cell Count: 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, 1-10 Lead-Acid cells (2-20V) Current Drain Balancing (LiPo): 300mA/cell Charge Termination (NiCd/NiMH): Automatic, negative Delta Peak method Charge Termination (Lead-Acid/Lithium): Automatic, voltage-dependent, CC-CV process Dimensions: 225.4 x 158.6 x 62.4mm Weight: 38-1/2 oz. (1.09 Kg)
Check price and availability
Found 11 years, 7 months ago