HobbyKing
Turnigy Fatboy 8 1300W Workstation Charger
11 reviews
Pack capacity | 20mAh to 360000mAh |
Input voltage | 10-32VDC, reverse polarity protected |
Input current | 1A to 60A, software limited |
Output battery charge current | Adjustable range 10mA to 40A, limited by 60A input current |
Output battery discharge current | Internal discharge 10mA to 10A, 100W max |
Continuous max output power | 600W @ +12VDC input, 1300W @ +26.35VDC |
Cell balancing | Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging |
Cell balancing current | 1A per cell |
Current calibration | Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA |
Data integrity | Checksum, CRC checking |
Cooling fans | Twin, 13 CFM, 50mm diameter |
Heat sink | Internal 200W aluminum, thin finned |
Output battery connector | JST PA series, 9 position |
LCD | 2 line, 16 character, light grey/blue backlit |
Size | 148 x 167 x 91mm |
Specs:, Battery type:, Lithium Polymer, Lithium Ion, Lithium Manganese, Voltage calibration:, Cell voltage measurements are factory calibrated to a, Note: Balance board required, sold separately. See related items below. Optional PC interface cable also sold seperatly.,
POWER
Introducing a charger like no other...the Turnigy Fatboy 8 - an ultra powerful 1300W workhorse! So much more than a charger, we had to call it something else, so we chose to label it a "Battery Workstation". Capable of charging, discharging, monitoring or performing multiple cycles on any current or future battery chemistry at alarming speed, Fatboy 8 represents the end of all speculation about who sells the most powerful battery management system in its class for the best value. At price per WATT, it blows the lid off the competition and represents unprecedented VALUE.
SAFETY
Do not be scared off by the claims of this advertisement by thinking this is too much charger for you. This may be the safest, simplest charger you will ever use. That's because safety was the #1 priority when designing this charger. As a result, you can not make a mistake when you use it. It simply will not let you. It knows how many cells are connected by monitoring charge voltage on each cell in the pack individually. It performs an entire series of tests to make sure the battery is hooked up correctly to the charger before it ever even starts to charge, checking for valid voltages on each cell, reverse polarity conditions, reversed node wiring to name a few. It constantly monitors the total pack voltage and compares that to the sum of the individual cells. It can not and will not ever charge a single lithium cell above the proper end-of-charge voltage and assures you of the most accurate, laboratory quality readings at all times. Furthermore, if a pack has been over-discharged, it will automatically enter ...
Check price and availability
Found 5 years, 4 months ago
at
HobbyKing