HobbyKing
Turnigy nano-tech 1300mAh 6S1P 35~70C Lipo Pack (450 helicopter HK/Trex/Rave/E4 etc)
5 reviews
| Capacity | 1300mAh |
| Dimensions | 106 x 34x 29mm |
| Balance Plug | JST-XH |
| Discharge Plug | XT60 |
Voltage:, 6S1P / 6 Cell / 22.2V, Discharge:, 35C Constant / 70C Burst, Weight:, 215g (including wire, plug & case),
This nano-tech pack is designed for use in 450 class helicopters such as the
HK450 PRO
,
TREX450 PRO
,
Rave 450
,
Beam E4
etc...
It fits the HK450 PRO perfectly without any modification necessary to the battery tray or canopy!
By running a lower KV motor (around 1700KV), you can achieve longer flight times and extremely high performance (when compared to a standard 3S setup) due to the increased efficiency of a higher voltage setup in your 450 class helicopter!
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, ...
Check price and availability
Found 5 years, 2 months ago
at
HobbyKing