SDSHobby
iMax B6AC+ Multifunctional Balance Charger /Built-in AC Adapter
| NOTE | when balance charging Lithiumbatteries, both the balance tap and the main |
| Charge current range | 0.1~5.0A |
| Discharge current range | 0.1-1.0A |
| Current drain for balancing Li-po | 300 mAh/cell |
| NiCd/NiMH battery cell count | 1-15 cells |
| Li-ion/Polymer cell count | 1-6 series |
| Pb battery voltage | 2V, 20V |
B6AC+ Charger Includes:, Internal independent lithium battery balancer:, Employs an individual-cell-voltage, Balance individual cells during discharge:, During the discharge process, B6-Pro, Fast and Storage mode charging:, "Fast" charge will fully charge a lipoly battery in, Charges various types of LiPoly cells:, Includes charging programs for LiFe (A123),, Data store/load:, Up to 5 batteries' data can be stored for easy programming., Cyclic charging/discharging:, 1-5 cycles of either charge>discharge or dischage>charge, B6AC+ Specs:, Operating voltage range:, AC 100-240V, DC 11.0~18.0 Volt, Circuit power:, Max. charge power 50W,
Charger with built-in AC adapter - use at home and at the field 5-1/4" x 5-3/4" x 1-5/8".
Dual Power multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells,1-15 NiCd/NiMH cells,
and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug
lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are
compatible with many Asian battery packs.
power wires must be connected to the charger.
balancer to maintain your pack in balance while charging.
can monitor and balance each cell of the pack individually. An error messagewill sound
and the process will end automatically if the voltage of any single cell is abnormal.
the shortest time. "Store" setting will charge the battery at approximately a 50% charge
for long term storage. This prolongs the useful life of the battery pack.
Li-Ion, and LiPo battery types.
is possible.
Check price and availability
Found 11 years, 6 months ago