RCModelScout.

R2Hobbies

Eurgle 80A HV Brushless Motor Programmable ESC with Internal Data Recorder

Input Voltage:,

Eurgle 80A HV Brushless Motor Programmable ESC with Internal Data Recorder
Model Number : rcps41817_080
You are buying a brand new Eurgle 80A HV Brushless Motor Programmable ESC. The main feature of this ESC is which comes with an internal data recorder. It may record the voltage, rpm, current, temperature and percentage of the throttle. If you want to get the data during flying but weight is a critical issue to you, internal data recorder is exactly what you need! If you buy the data recorder separately, normally it will cost you at least US$100, but now, it is included with with the ESC!
Also, it is similar to the other ESCs in the market. You may either program it via handy programming card or by PC via USB adaptor. Both of them are also optional.
It is very easy to setup and program. Most of the settings are auto-detected. Also, it is made with higher quality micro processor and more FETs with lower internal resistance.
Features:
Microprocessor controlled
Integrated the function of flying data logger, could recording the flying data as:
Current
Voltage
Temperature
RPM
Power
Throttle Travel
Programmable the parameters of ESC through USB cable connected to computer
Upgradeable the firmware of ESC through Internet
80A continous(90A surge)
Up to 20cells NiMH/NiCad or 2~6cell Lithium-polymer
High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
BEC:3.5A (Linear BEC)
Support 4 micro servos
Programmable low voltage cutoff
Programmable cutoff types(soft cutoff/hard cutoff)
Programmable brake type(disable/soft brake/hard brake)
Time advance programmable (low/standard/high)
Programmable current limiting(very ensitive/standard/insensitive/disable)
Governor mode(low rpm governor/high rpm governor)
Programmable startup type(very soft start/soft start/fast start)
Thermal Protection(100 centigrade)
Apply to most of inrunner and outrunner brushless motors.
No complex programming, auto adapt work mode.
A LED (flashes) indicates full throttle.
Runs motor in forward or reverse by swapping any two motor wire connections.
Safe “power on” arming program ensures motor will not accidentally turn on.
Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
The ESC is disabled when the voltage is over 26v at power-on.
User Manual
Software
24v
Battery :
2-6S Lipo
Current (A) :
80A
Surge Current :
90A
BEC :
4A switching
Size :
70 x 27 x 17mm
Weight :
~54g
Gross Weight :
~80g
Item(s) Included:
Eurgle 80A Brushless Motor Programmable ESC with Internal Data Recorder
English Manual

Found 11 years, 9 months ago