HobbyKing
Hobbyking 70amp OPTO ESC with 5 Amp External UBEC
4 reviews
| Brake Setting | On/Off |
| Setting for battery type | LiPo or NiCd /NiMh |
| Low-voltage protection | low / medium / high |
| Motor timing setting | low/medium/high |
| Start up type | soft/medium/hard |
| Helicopter mode (Governor) | On/ Off |
| Motor Direction | Cw/Ccw |
| PWM operating frequency | 8KHz / 16KHz |
| LVP type | slow down/dead cut |
| Continuous current | 70A |
| Max current (10 seconds) | 100A |
| Standard configuration | 5.5V/5A (external) |
| Jumper setting | 5/5.5/6 volts |
| Dimensions | 70*28*20 mm |
| Weight | 80g |
User Programmable settings:, Specs:, Input Voltage:, 2-6s LiPo (7.4- 22.2v) / 5-18 NiMh, BEC type:, OPTO/UBEC 5amp (external),
Here's an ESC for those that like to push their equipment a little - hotliner pilot's this means you!
The Hobbyking 70amp ESC is Opto-isolated from the receiver, meaning that it has no internal UBEC to power your receiver and servos.
Historically, you would need to purchase either an external UBEC or a separate receiver battery to complete your power system when utilising an Opto-coupled ESC.
Not any more - We have an all in one solution!
This ESC is supplied with a pre-wired 5amp external UBEC, not just any UBEC, this is jumper adjustable to provide 5, 5.5 or ...
Check price and availability
Found 5 years, 4 months ago
at
HobbyKing