RCPlanet
Castle Creations Mamba Monster 25V + 5mm 2650 kV Combo CSE010-0062-02
| Length | 67.78mm (2.67") |
| Diameter | 39.98mm (1.57"), 41.78mm (1.6") with fins |
| Weight | 121g (0.27lb) |
| Shaft Diameter | 5mm (.2") |
| Max Input Volts | 16.8V |
| Amp Rating | 120 |
| Continuous | N/A |
| Resistance | .0003 Ohm |
| Brake | Proportional with adjustable curve |
| Reversible | Yes, with lockout |
| Low Voltage Cut-off | Programmable |
| Size | 2.2 x 1.9 x 1.4" (56 x 48 x 35mm) |
| Weight | 4.3oz (121g) |
| Connector Type | 6.5mm |
, Motor, Wire Lead Gauge: 10, ESC, 6 cell LiPo, ,
This is the Castle Creations Mamba Monster Brushless Power System for Monster Truck and Extreme 1/8 scale Vehicles.
Features:
Motor: Neu-Castle 2650 KV motor designed for 1/8 scale Buggy applications
Intended for 4S (16.8 Volt) operation
Standard Neo rotor on a 5mm shaft
High end bearings for trouble free operation
Machined integrated cooling fins
4 pole, slotted, brushless motors wound 1 turn in a Y configuration
ESC: Designed for extreme 1/8 scale monster truck applications
Profiles can be custom designed on a PC
Infinitely adjustable throttle and brake curves with timing advance
Punch Control allows dialing in horsepower where needed
Brake Strength allows straight tracking under hard braking
Drag Brake helps entry into corners
Start Power for smooth launches
Programmable cutoff voltage for LiPo usage
On/Off switch
Universal receiver connector
Includes:
2650kv Neu/Castle motor
18T Pinion gear
Mamba monster version 3 speed control
Requires:
Installing into vehicle
USB Cable
Check price and availability
Found 11 years, 8 months ago