HobbyKing
Scorpion S-5030-220kv (F3A Special) Brushless Outrunner Motor
| Stator Diameter | 50 mm (1.56 in) |
| Stator Thickness | 30 mm (1.024 in) |
| Motor Wind | 16 Turn Delta |
| Motor Wire | 15-Strand 0.33 mm |
| Motor Kv | 220KV RPM / Volt |
| No-Load Current | (Io/10V) 1.03 Amps |
| Motor Resistance (Rm) | 0.027 Ohms |
| Max Continuous Current | 70 Amps |
| Max Continuous Power | 2590 Watts |
| Outside Diameter | 59.8 mm (2.35 in) |
| Shaft Diameter | 7.98 mm (0.314 in) |
| Body Length | 60.9 mm (2.39 in) |
| Overall Shaft Length | 118.6 mm (3.67 in) |
| Max Lipo Cell | 10s |
| Shaft Material | Titanium |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:12, Magnet Poles:14, Weight:, 606 Grams (21.38 oz),
Scorpion S-5030-220KV motor is specially designed for F3A and run on 10 Li-Po cells with props in the 19 to 20 inch range. Everything possible has been done on this motor to get the most possible power at the lightest possible weight. The Front housing, Bearing Tube and flux ring have been made as light as possible, and a Titanium Main Shaft is used to save even more weight, while maintain strength.
Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Plated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 ...
Check price and availability
Found 5 years, 5 months ago
at
HobbyKing