R2Hobbies
Turborix RC 1300g 3D Plane 1100kv (rpm/v) D3639 Outrunner BL Brushless Motor
| Model | D3639-1100 |
| Airplane Class | 1300g (3D Plane) |
| KV (rpm/v) | 1100 |
| Voltage (v) | 11.1 |
No Load Current (A):,
Turborix 1100rpm/v D3639 RC 1300g 3D Plane Brushless Motor
Model Number : rcps81520
4.8
No Load Speed (rpm) :
12300
Load Current (A) :
35A/11.1v
33A/11.1v
Load Speed (rpm) :
8740
8000
Recommended ESC :
Turborix Advance 40A ESC
Propeller :
APC12X7
APC13X4
Pull (g) :
1750
1650
Weight :
168g
Gross Weight :
~255g
Configure Advise and Usage Limit:
1.
Advise application power 500W
2.
Momentary power 700W max
3.
Propose configure for this motor:
Battery---Battery---1800mAh 20C 3Slipo
ESC---40A
propeller--- APC13X4
4.
Don't let the exiguous carbon steel metal too close with motor when fixing, it breathe inside motor by magnetic field then cause the motor to set up or cause the winding short!
5.
Please use stainless steel screws when fixing the motor, and the length of the screw don′t longer than the pedestal, lest to breach the wire!
6.
Motor temperature should not exceed 90�Ž
Configuration characteristic:
1.
Magnet---N35SH
2.
Silicon steel---0.35(mm)
3.
Bearing---NMB
4.
Shaft--- Carbon steel
5.
Guide wind system--- Free cooling
6.
Insulated material--- Somar Epoxy (Japan)
Reliability Testing:
1.
Testing Condition
Voltage---11.1(V)
Propeller--- APC13X4
Load current---28(A)
Net Thrust---1300(g)
Room temperature---25(�Ž)
Run mode---5 Minute ON, 2 Minute OFF
Shaft direction gap--- 0.05-0.2mm
Noise no load---30db
2.
After testing 100 times circle
Net thrust---1300(g)
Current---28.5(A)
Temperature rising---85(�Ž)
Shaft direction gap--- 0.1-0.2mm
Run mode---5 Minute ON, 2 Minute OFF
Check price and availability
Found 11 years, 9 months ago