RCModelScout.

R2Hobbies

Turborix RC 400g 3D Plane D2730 2500kv (rpm/v) Outrunner BL Brushless Motor

Voltage (v):,

Turborix D2730 2500rpm/kv RC 400g 3D Plane Outrunner Brushless Motor
Model Number : rcps81527_3
7.4
No Load Current (A):
1.6
No Load Speed (rpm) :
21800
Load Current (A) :
11.3
Load Speed (rpm) :
16200
Recommended ESC :
Turborix Advance 20A ESC
Propeller :
EP6030
Pull (g) :
390
Weight :
21g
Gross Weight :
~65g
Configure Advise and Usage Limit:
1.
Advise application power 110W
2.
Momentary power 150W max
3.
Propose configure for this motor:
Battery---Battery---1350mAh 12C 3Slipo
ESC---20A
propeller--- GW/EP7060
4.
Don't let the exiguous carbon steel metal too close with motor when fixing, it breathe inside motor by magnetic field then cause the motor to set up or cause the winding short!
5.
Please use stainless steel screws when fixing the motor, and the length of the screw don′t longer than the pedestal, lest to breach the wire!
6.
Motor temperature should not exceed 90�Ž
Configuration characteristic:
1.
Magnet---N35SH
2.
Silicon steel---0.35(mm)
3.
Bearing---NMB
4.
Shaft--- Carbon steel
5.
Guide wind system--- Free cooling
6.
Insulated material--- Somar Epoxy (Japan)
Reliability Testing:
1.
Testing Condition
Voltage---11.1(V)
Propeller--- EP0947
Load current---12(A)
Net Thrust---110(g)
Room temperature---25(�Ž)
Run mode---5 Minute ON, 2 Minute OFF
Shaft direction gap--- 0.05-0.2mm
Noise no load---30db
2.
After testing 100 times circle
Net thrust---100(g)
Current---13(A)
Temperature rising---85(�Ž)
Shaft direction gap--- 0.1-0.2mm
Run mode---5 Minute ON, 2 Minute OFF
Item(s) Included:
Turborix D2730B 2500rpm/kv Outrunner Brushless Motor
Gold Connectors
Shrink Plastic Tubes

Found 11 years, 9 months ago