ReadyMadeRC
2 Way Video Splitter (3-18v)
| Pin orientation | Vertical |
A high quality and very tiny video splitter for the diversity transmitters or parallel ground screens and recorders.
This 2 channel video splitter which will allow you to share the signal from one single camera to 2 different transmitters.
for example;
you can use 1200 and 800mhz transmitters same time for diversity receivers.
Or you can use it on your ground station for splitting the video to VDR, goggles or maybe a second display for your friends.
You can supply your camera and transmitters over its 3 pin servo type connectors (1A max), the 3 wires are GND, Vsupply, Video Signal.
Important!!!
The + trace is a pass through, meaning that all 3 devices are connected to it through the red wire in the middle of the servo cable. In case any of your devices operates on a different voltage, you should remove the red wire from that connector.
Specifications
Supply Voltage
3.3 - 18 volt (parallel on 3 ports)
Video System
75 ohm with SAG correction
Operating Temperature
-40 to +105 °C
Current Consumption
30mA
Video input voltage：75R
1.0Vp-p
Dimensions( L X W X H)
3mm X 18mm X 28mm
Weight
2.0 gram
Check price and availability
Found 11 years, 9 months ago