BevRC
BEV 5.8G 200mW pulg and play system specially designed for FPV
| - Working voltage | DC 7-16 volts |
| - Camera output | same as input |
| - 8 Selectable channels | DIP switches |
| - Working frequencies | CH1 |
| - Current consumption | 180mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| - 8 Selectable channels | DIP switches |
| - Working frequencies | CH1 |
| - Working voltage | DC 9- 13 volts- Current consumption |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
| RED | DC7-16 Volts input |
| BLACK | GND |
| RED | V output for your cam, normally 0.5V less than the DC input from the 2-pin connector. |
| BLACK | GND |
| YELLOW | VIDEO |
| WHITE | AUDIO (6.0Mhz),normally no use |
| GREEN | AUDIO(6.5Mhz),normally no use |
Download the manual here:, , Transmitter's features:, - High grade switching regulator., Receiver's features:, - Dual (2x) A/V outputs., Includes:, - TXV582 5.8 GHz 200mw transmitter, TX:, Always check the color of every wires, then you won't go wrong., The 2-pin connector:, The 5-pin connector:, RX:, Please check the channel settings sticker on the Rx.,
This is another great option to those whom want to do FPV without interference problems with 2.4 GHz R/C radios.
The 200mW 5.8 GHz transmitter and receiver are capable to go take your audio and video wirelessly where many others transmitters can't.
The tiny pocket size receiver besides its small size, it also comes with two (2) A/V outputs to easy connect two video displays or 1x video display and 1x video recorder
simultaneously.
To complete the easy use of this system, the transmitter which is provides clean 12 volts to power any of our 12 volts DC cameras even share power with the motor.
We flew this combo with the stock whip antennas, and even so we got to go at 1Km (3/4 of a mile) at 500' feet high.
With a high gain patch antenna connected to the receiver we are getting ranges about 1.7+ km (1+ mile).
It's great and reliable system, with all the important features that plug and play systems mu
st to have.
- Built-in microphone with volume control.
- Digital phase-locked loop circuit, no channel drift issues.
- High quality noise filtering circuit.
- Regulated output voltage for the camera.
- Low profile circuit board.
- All Molex type of lathed plugs for safe connections.
- Weight 26 grams (0.9 oz).
- Weight 48 grams (1.7 oz).
- R5800 5.8 GHz pocket size receiver
- Transmitter's power plug with leads
- - Receiver's A/V out cable with RCA plugs
(if u need another cable, please check
here
)
- 1 power plug with lead for Rx
- 1 SMA converter for Rx
- 2x 3dBi whip antennas
- 12 volts camera with a plug and play cable can be added to this combo. (see below for this option)
Check price and availability
Found 11 years, 9 months ago