GetFPV
DJI Naza M Multi-Rotor Stabilization Controller
Naza-M offers three types of control modes: GPS Atti. Mode(with GPS module), Atti. Mode, Manual Mode. Switch among the three modes to adjust to different flight environments. Naza-M can adjust automatically and intelligent switch between GPS Atti.mode and Atti. Mode to ensure the safety and security of the flight., Immediately Mode: By using this mode once the motors start and throttle stick has exceeded 10%, motors will stop immediately when throttle stick is back under 10% again. In this case, if you push the throttle stick over 10% within 5 seconds of the motors stopping, motors will re-start .If you don’t push throttle stick within three seconds of the motors starting, the motors will stop automatically., Intelligent Mode: In Manual, only executing CSC will stop motors. In Atti Mode. any one of following four cases will stop motors:, a) You don’t push throttle stick after motors start in three seconds;,
Details
NAZA simplifies installation; saving space and weight. With the innovative All-in-One design, NAZA contains inner damping, controllers, a 3-axis gyroscope and barometer in its light and small Main Controller. NAZA can measure flying altitude and maintain. Therefore it can be used for autopilot/automatic driving.
Features
Advanced Attitude Stabilize
Advanced mix guidance algorithm and control algorithm inherit the outstanding flight stability of DJI products, provides excellent maneuverability,
Multiple Flight Control Mode with Intelligent Switching
GPS Module Available (Sold Separately)
Naza-M GPS will greatly enhance performance with Position Hold, Return-To-Home and Intelligent Orientation Control. With the GPS Module, multi-rotors will have position and altitude lock in windy conditions. Precise hovering.
Intelligent Orientation Control
Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC) the forward direction has nothing to do with nose direction. In course lock flying, the forward direction is the same as a recorded nose direction. In home lock flying, the forward direction is the same as the direction from home point to multi-rotor.
Fail-safe Mode
If your transmitter supports Fail-Safe, then you can set Fail-Safe output of receiver to input port-U. Naza controller has built-in auto level Fail-Safe function. That means when the communication between MC and transmitter is disconnected, the outputs of all command sticks from controller will go to center point . If your transmitter has only 4 channels, then the MC will work in Atti. Mode by default without Fail-Safe function.
Two Levels Low Voltage Protections
In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage; DJI has designed in two levels of low voltage protection. You can choose not to use them, however we strongly recommend to open the protections!
Motor Disarm
b) Executing CSC;
c) Throttle stick under 10%, and after landing 3 seconds.
d) The slope angle of multi-rotor is over 70°, and throttle stick under 10%.
Check price and availability
Found 11 years, 7 months ago