ReadyMadeRC
Fat Shark AttitudeSD VGA Video Glasses
Note | Battery, charger and adjustable earphones are sold separately. |
Option 1 | The |
Option 2 | If you want to share the power supply with your ground station, the |
Option 3 | Any 2s-3s lipo with a 2.1mm barrell connector like |
Interpupillary (IPD) distance | 59-69mm (adjustable) |
Power input | 7-13V (2s/3s supply) |
Power Consumption @7.4VDC | 200/350mA (direct/wireless) |
Weight | 150g |
Power Supply | 7-13V (2s-3s supply) |
Power consumption | 310mA@7.4VDC |
Transmitting Power | 250mW |
Ch1 | 5740, CH2 |
Mechanical | 55x26x11mm |
Weight | 22g with antenna |
Features: Adjustable IPD, 35 degree FOV VGA display, secured rubber eyecups, lightweight, integrated 5G8 receiver and MIG V4 head tracker., Kit includes:, AtttitudeSD headset (with RX and HT) (Uses the high performance NexWaveRF receiver module), *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
AttiudeSD (VGA, 640X480) FPV goggle with adjustable IPD, large 35 degree FOV, integrated 5G8 receiver and MIG head tracker. Kit includes Fat Shark's new high powered 250mW TX and filtered balance lead adapter.
AttitiudeSD is the redesigned RCV922 headset with the largest FOV of any consumer video glasses for the most immersive FPV experience. High quality tooling and finish oozes quality and comfort.
250mW 7ch 5G8 TX*
Filtered balance lead adapter
3dBi 5G8 antenna
3m AV cable
Futaba data cable
zipper carry case
manual
How to power the Attitude goggles?
FatShark battery
will plug directly in to the goggles and fit in the head strap for a great portable solution.
Dominator replacement cable
can be used. You would then feed the power from the 2.1mm barrel connector that normally powers your video receiver/ground station into the Dominator/Attitude cable, and then plug the extra power plug included with the cable into your video receiver/ground station so you are powering both devices with the same battery.
this
or
this
will work!
Headset Specifications
Optics
FOV 35 Degrees Diagonal
Optional diopter lens inserts available in -2, -4, -6
Audio
Stereo
Electrical
User Controls
Channel Selection
Contrast/brightness
Head tracker reset/menu control
System
NTSC/PAL Auto Select
Interlaced Only (not progressive scan)
Mechanical
Ergonomic molded shape
Secured rubber eye cups for ambient light reduction
Adjustable headband
Display
Two full color micro VGA LCD's (640x480)
Resolution 922,000 pixels per eye
Head Tracker
MIG V4 firmware
Magnetic, Inertial, and Gyro
Receiver
5.8GHz 7channel NexWaveRF
Interface
3.5mm 4p AV in/out port
Power in port
3.5mm 3p Earphone port
PS/2 Head Tracker port
Transmitter Specifications*
Electrical
Antennae
External dipole (circular polarized compatible)
Check price and availability
Found 11 years, 7 months ago