ReadyMadeRC
PowerBoxAV Audio Video and Power Distribution Box
Dimensions | 85 x 74 x 23mm |
Weight | 120 g |
Power Requirements | 6-12v, 30W max power output |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
Ships with:, 1 x 3 meter 3.5mm -> 3.5mm A/V cable (goggles -> powerbox), There are a variety of cables you can use with the Powerbox. For power, it's the standard 2.1mm barrel connectors:, There are 1 foot cables with female RCA connectors:, There are 1.2meter and 3 meter cables with male RCA connectors:, And also 1.2 and 3 meter cables that have the mini connectors on both ends that can connect between the Powerbox and some of the FatShark goggles and the EZTracker as well:,
Ground-station Companion
Today’s ground-station is typically an array of devices, LCD monitors, LCD goggles, video recording devices, antenna trackers. These devices all have to be powered, and interconnected with audio/video connections.
The PowerBoxAV simplifies the cable mess, and provides clean, redundant, distributed power.
Its video buffer ensures that each of the connected devices receives a clean PAL/NTSC signal, with correct video level specifications. For video sources which are slightly out of spec, an internal trimmer allows the level to be corrected.
Filtering
Each of the DC power jacks contains a heavy-duty LC filter, to ensure that each A/V device receives clean, glitch-free power. A resettable fuse, and reverse-polarity protection protects against the occasional wiring mishap.
Low Voltage Alarm
An internal low voltage alarm automatically senses the potential of the connected power source(s) and sets an appropriate alarm threshold, giving you plenty of time to land before the dreaded black screen kicks in.
Interconnects
All FatShark and ImmersionRC ground-based equipment uses standard 3.5mm 4-pole jacks for video/stereo-audio connections.
The PowerBox is supplied with a selection of long, and short 3.5mm->3.5mm cables, to clean up ground-station wiring mess.
No more cumbersome RCA/Phono connectors!
Twin Redundant power inputs
4 filtered power outputs
Fused input, reverse polarity protection
4 buffered A/V outputs
Standard 3.5mm 4-Pole jacks, used on all FatShark/ImmersionRC equipment
Interconnect cables supplied
Low-battery detect, on each redundant power input
Audible Alarm for low battery
Adjustable video gain, correct for out-of-spec receivers
1 x 30cm 3.5mm -> phono female cable
1 x DC power cable, terminated in wire ends
store/index.php?main_page=
product_info&cPath;=11_66_68&
products_id=467
store/index.php?main_page=
product_info&cPath;=11_66_68&
products_id=140
For the video connectors, it depends on what you are hooking them to!
store/index.php?main_page=
product_info&cPath;=11_66_67&
products_id=379
store/index.php?main_page=
product_info&cPath;=11_66_67&
products_id=231
store/index.php?main_page=
product_info&cPath;=11_66_67&
products_id=230
store/index.php?main_page=
product_info&cPath;=11_66_67&
products_id=383
store/index.php?main_page=
product_info&cPath;=11_66_67&
products_id=553
Check price and availability
Found 11 years, 8 months ago