ReadyMadeRC
Simple OSD 10Hz GPS Module V2
| Dimension | 16mm x 16mm x 6mm |
| Max. Update Rate | up to 10Hz |
| Support AGPS function ( Offline mode | EPO valid up to 14 days )S |
This is our new 10Hz GPS module that increased noise resistance and powered with a Super Capacitor to backup for more than one week.
SimpleOSD GPS module is 66 channel -163dB high sensitive urban GPS device with 10Hz refresh rate
Backup system and 3D Fix status led onboard.
FGPMMOPA6B is best civil GPS module on the world
This new B type GPS module including fine tuned Patch antenna. It's working perfect on urban conditions.
Features
MediaTek Single Chip
Patch Antenna Size 15mm x 15mm x 4mm
L1 Frequency, C/A code, 66 channels
Embedded LNA and SAW filter
With Active patch antenna
High Sensitivity Up to -163 dBm tracking, superior urban performances
Position Accuracy < 3m CEP (50%) without SA (horizontal)
Cold Start is Under 35 seconds (Typical)
Warm Start is Under 34 seconds (Typical)
Hot Start is Under 1 second (Typical)
Low Power Consumption 48mA @ acquisition, 37mA @ tracking
Low shut-down current consumption 15uA, typical
DGPS(WAAS, EGNOS, MSAS) support (optional by firmware)
UART Interface
1 week backup time with Super Capacitor
3.3 to 5.5v supply voltage (Default 5v, need a small hack for 3.3v usage)
3.3v Hack
These modules are including a BlueLED between supply and backup capacitor for voltage dropping. You have to replace the LED with a diode for 3.3v usage. If you want to use the modules on your own 3.3v project;
Replace the Blue LED with 1N4148 or similar silicon diode.
Documents
SimpleOSD GPS Module Datasheet
FGPMMOPA6 PDF Document
Standart MTK Commands for settings
Check price and availability
Found 11 years, 9 months ago