BevRC
Skyzone sky01 video goggles
Free Download:, SKY01 Manual-V1.0.doc,
Support most of the 5.8G video tranmitters in the market.
Wireless
The FPV
Google
with Built-in 5.8Ghz
Diversity
Receiver and
diversity
Antenna inputs for best
reception
.
It working in
diversity
mode to achieve good signal utilization and improve the image quality.
It supports 4 Bands and total 32channels (Bands selection and
Resulting
Frequencies
see details in
Specification
s
)
Bands Setup
·
Long Press Button "BAND" to enter Bands setup (beeps indicating the current band) and press the
Button "Band" again within 3 seconds to select the Bands. Different beeps refer to different Bands.
·
It'll return to normal working mode after 1 short beep if there is no operation within 3 seconds.
·
Beep
Receiver
BAND
1 short beep
Band 1
2 short beep
Band 2
3 short beep
Band 3
4 short beep
Band 4
Channel Setup
·
Press Button "CH" once to select from CH1 to CH8. Different beeps refer to different channels.
Beep
Receiver
Channel
1 short beep
CH1
2 short beep
CH2
3 short beep
CH3
4 short beep
CH4
5 short beep
CH5
6 short beep
CH6
7 short beep
CH7
8 short beep
CH8
Head Tracker
PPM Channel Setup
·
Press and Hold Button "TRACK", then connect power to enter Head Tracker Setup Menu (Release as soon as beep).
Head Tracker beeps indicating the current PPM Channel. See
details
below.
·
Short Press "TRACK" Button to select different PPM Channels. Long Press the button to enter Pan Tracking Range
setting mode.
·
Beep
PPM Channel
1 short beep
Pan CH5,Tilt CH6 (F
actory default
)
2 short beep
Pan CH5,Tilt CH7
3 short beep
Pan CH5,Tilt CH8
4 short beep
Pan CH6,Tilt CH7
5 short beep
Pan CH6,Tilt CH8
6 short beep
Pan CH7,Tilt CH8
Pan Tracking
Range
Setting
·
1 long beep refers to 90 degrees, 2 long beeps refer to 180 degrees
·
Short Press "TRACK" button to change the working Range with corresponding beep
·
Long press "TRACK" to return (with 1 short beep) PPM channel setup mode.
Please disconnect the power after setup and then reconnect to enter normal working mode.
Short press "TRACK" button is ok to setup head tracker into Center
position
while working.
Front Camera
·
The Front Camera is Wide-Angle Camera with 680X480(VGA) Resolution and good low
Illumination
. It's very
convenient to view
around without taking off the
Goggles
.
·
Press "Camera" button to open the Front Camera.
Volume
·
Each boot is automatically set to the lowest volume to avoid sudden loud boot.
·
A long beep indicates that you have reached the MAX or MIN Volume. .
Display Setup
Interpupillary distance
(
IPD
)
Adjustable
·
Pull the IPD Adjuster to adjust the interpupillary distance
Brightness/ contrast settings
·
It's easy to setup the Brightness/Contrast with the
5-direction switch
. Short press is to adjust gradually,
long press is to adjust continuously. It will auto saved if there is no operation within 5 seconds.
·
Press Center button
3 seconds
to setup Brightness/Contrast to factory default.
AV input
·
The
goggles
support AV IN. The wireless model will close when the AV IN is connected to save power.
·
The Front Camera is ok for use under AV IN mode.
AV output
·
AV Out is the diversity Video and Audio output
·
Earphone port is audio output for connecting earphones.
Check price and availability
Found 10 years, 10 months ago