HobbyWireless
T1012 TRANSMITTER 1.2 Ghz 1000mW - Lawmate - Also available to USA customers
Weight | 30g (transmitter only) |
Transmission power 50-ohm load CH1 Vcc = 12V | 30dBm |
Nominal output impedance | 50 ohms |
Operating voltage | Vcc, 10.5V (minimum), 12V (typical), 13V (maximum) |
Supply current Vcc = 12V | 450mA (typical), 500mA (maximum) |
Video input voltage 75-ohm impedance | 1Vp-p |
Audio input voltage 10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Storage humidity | 10 to 80% |
Dimension and weight Excluding SMA connector | 50 x 26 x 13mm, 20g |
to see the transmitter and camera connections. Note | BNC to RCA adpater is sold separately in accessories. |
Details:, This transmitter is a power house, providing a 1000 miliwatts of pre RF output. It is the best transmitter for long range applications. (for RC models is recommended to install the T1012 as far as possible away from the models receiver) Even with all that power, it weights only around 1oz 30 grams . With all this, and the right setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, T1012 has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it., Features:, , Specifications:, , Standard shipping package:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Click here for Specs
1000mW RF output power
Eight (8) selectable channels
1.2 GHz frequency band
Works with any camera PAL or NTSC
Digital Phase-Lock-Loop circuit no drifting problem
Works with any of our receivers
Audio and Video cable with RCA adapter
Highly integrated circuit
High reliability/linearity/AIGaAs/GaAs FET amplifier module
Uses digital phase-lock-loop circuit without temperature drifting problem
1.2 GHz 1000mW AV transmitter
SMA type dipole antenna x 1
Jack connector to RCA AV input and power input cable x 1
Click here
CLICK HERE TO CHECK OUR TECHNICAL SUPPORT PAGE FOR MORE EXTRA INFORMATION
Notes
The transmitter will have only the channel 8 (1280 MHz) available to USA users. Transmitters shipped to customers out of USA will have all channels available.
- Do not turn this transmitter on and leave it on for several minutes without air flowing through, it gets hot. This is 1000mW transmitter in a tiny little metal box !!!
-
No license is required to purchase it, however i
n order to legally operate within USA an
amateur radio license
is required.
Check price and availability
Found 11 years, 8 months ago