HobbyWireless
TR1012 Combo Set Receiver +Transmitter 1.2Ghz 1000mW - Lawmate - Also available to USA customers
| The system can be powered using any DC power source from 10.5 to 13 volts DC example | 3 cells lithium polymer battery works great. |
Details:, Do you want a powerful wireless systems that gives you more than 3 miles of range?, It's perfect for long range applications, (for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it only weights around 1oz 30 grams ., Package includes:, -Transmitter 1.2ghz 1000mW with RCA cable for audio and video input., Transmitter Specs:, -1000mW RF output power 1.2GHz frequency band, Receiver Specs:, - Operating voltage from 10.5 to 13 volts DC - 240mA power consumption, Notes:, All transmitters shipped to any addresses within US territory will have only the Channel 8 (1280 MHz) available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
Then, this is what you are looking for. This transmitter is a power house, providing a 1000 miliwatts of pure RF output.
With all this, and the right setup, for sure you can get video reception miles away.
It's highly recommended install the transmitter in ventilated areas, to allow the air to keep it cool.
Get the most out of this system using any of our high gain antenna for the receiver, and increase the range for more than 4 miles plus !!!
When using a 1.2 GHz video system with any 2.4Ghz radio transmitter, a low pass 1.2 GHz filter is recommended to prevent harmonics from affecting you
r RC system.
- High Sensitivity Receiver R1200-STD, compatible to PAL , NTSC and SECAM.
- Receiver's Audio and video output cable with RCA connectors
- One set of two 3dBi antennas
- Power Plug for receiver and transmitter is needed -
Click here
-
Microphone is available to be used with this transmitter click here for details
-
Eight (8) selectable channels
- Works with any camera PAL or NTSC
- Digital Phase-Lock-Loop circuit no drifting problem
- Audio and Video cable with RCA adapter
- Detachable SMA Antenna
- Audio Sub-Carrier 6.5 MHz
- Operation Voltage 10.5-13 volts DC volts
- Consumption Current 450mAh
- Transmitter weight 35 grams
- Dimensions 50x26x13 mm
- 1.2GHz frequency band
- Dimensions 80 x 63 x 20mm
- Detachable SMA Omni antenna
- 1.2 GHz receiver updgrade is available (see below).
Click here for Transmitter and camera connection details
,
BNC to RCA adpater is sold separately in the accessories.
If your are not going to run your RC model, do not turn this transmitter on and leave it on for several minutes, it get hot, remember it is 1000mW transmitter in a tiny little box !!!
amateur radio license
is required. Any illegal operation and/or changes made by the user to the transmitter will be totally the user's responsibility.
No license is required to purchase it, however i
n order to legally operate within USA an
amateur radio license
is required.
Check price and availability
Found 11 years, 9 months ago