LowPriceRC
*XEN 5.8G 500mW AV TX and RX Systems For FPV
| CH1 | 5705MHz |
| CH2 | 5685MHz |
| CH3 | 5665MHz |
| CH4 | 5645MHz |
| CH5 | 5885MHz |
| CH6 | 5905MHz |
| CH7 | 5925MHz |
| CH8 | 5945MHz |
| Vidio output | 1Vp-p 75 |
| Audio output | 1Vp-p 600 |
| Power supply | DC 12V |
| Video | PAL/NTSC |
| Dimension | 5.2cm x 6.8cm x 1.3cm |
| Weight | 45g (without antenna), 55g (with antenna) |
| TX Power | 500mW |
| Power supply | DC 7-12V |
| Dimension | 6.8cm x 2.5cm x 3cm |
| Weight | 55g (without antenna), 65g (with antenna) |
| ch 1 | XXXO - 5944 = chan 8 |
| ch 2 | OXXO - 5925 = chan 7 |
| ch 3 | XOXO - 5904 = chan 6 |
| ch 4 | OOXO - 5885 = chan 5 |
| ch 5 | XXOO - 5646 = chan 4 |
| ch 6 | OXOO - 5666 = chan 3 |
| ch 7 | XOOO - 5686 = chan 2 |
| ch 8 | OOOO - 5706 = chan 1 |
Packing including:, , Spec for video receiver:, , 8-channels selectable:, , Spec for transmitter:, ,
Xen5.8G 500mW AV TX and RX systems for FPV is a plug-and-play wireless FPV set which is good for the one who are using 2.4Ghz radio control. Connect the AV transmitter with the camera at your kit to transfer the image to the AV receiver at the ground. Then you can see the live image immediately by connecting the AV receiver with a display. Two AV output is provided for both display and recorder.
5.8GHz 500 mW AV transmitter
AV receiver
AV cable x1
Antenna for TX and RX 3db
Two AV output
Ω
Ω
Built in microphone
Back of Receiver
Front of Receiver
Top of Receiver
Transmitter
<>
O = ON
X = OFF
Chan = channel on receiver = The settings are MIRROR IMAGED to the Transmitter.
Check price and availability
Found 11 years, 9 months ago