RCPlanet
Fuji Imvac BF-25EI 24.5cc 4-Stroke Gas Engine FJIBF25F
, Height:, Oil Pan to Rocker Cover 7.5" (190.5mm), Width:, 6.5" (165mm), Weight:, 4.65 lbs (2,113 g) with muffler, Weight:, 4.23 lbs (1,919 g) without muffler, Distance from firewall to prop rotor:, 5.125" (130mm), Muffler exhaust outlet diameter:, 9mm inner, 11mm outer, Distance across mounting screws on motor mount:, 95mm, Distance top and bottom mounting screws:, 75mm, Displacement:, 1.5 cu in (24.5cc), Bore/Stroke:, 24mmx24mm, Spinner Bolt:, 3/8-16 threaded 13mm hex, Practical RPM:, 1400-9000, Peak Horsepower:, 1.6hp @ 7500 RPM, Peak Torque:, .14kgm @ 5,000 RPM, Default carb settings, High Speed:, 1.75 to 2 turns OUT, Low Speed:, 1-1/3 turns OUT, Recommended Propeller:, 18x6, ,
Fuji Imvac four-stroke engines boast these advantages:
* Incredible fuel economy — less than half the fuel consumption of a comparable 2-stroke engine, for twice the flight time per fill at half the cost.
* Amazingly quiet operation — making them welcome even at the most noise-sensitive flying fields.
* The ability to maintain a consistent rpm range at all times - for delivering the realistic speeds and performance that giant-scale modelers demand.
* Includes EIS (Electronic Ignition System).
* High Torque
* Swings bigger props than 2-stroke engines.
* Excellent power to weight ratio.
* Needle settings are not affected by engine heat.
No more oil-gas mixing! Parts are lubricated by a constant flow of ultra-low viscosity oil from a pan on the bottom of the engine. A 3.4 oz (100 cc) bottle of oil is included.
Like all Fuji-Imvac engines, Fuji-Imvac 4-strokes offer the smooth, pinpoint throttle control of a Walbro butterfly carb. Fine-tuning the idle, low- and high-speed screws takes only a slotted screwdriver and a few seconds.
The BF-25 and BF-34 are gear driven engines, which make these powerhouses more reliable.
Requires
Regular unleaded gasoline, propeller, engine ON/OFF switch
EIS battery
Fuji Super Lubricating Oil or equivalent 0W-20 oil
Check price and availability
Found 11 years, 8 months ago