RCModelScout.

RCPlanet

Fuji Imvac BT-24EI 24cc 1.5ci Gas Engine FJIBT-24EI

, Displacement:, 1.46 cid (24cc), Practical RPM:, 1,200-11,000 RPM, Output:, 2.2 bhp @ 10,000 RPM, Weight:, 3.20 lbs (1,453 g) with muffler, Weight:, 2.95 lbs (1,342 g) without muffler, Fuel ratio, gas/oil mix:, High Speed Needle Setting:, Open ¾ turn from closed, ±¼ turn in Winter, Low Speed Needle Setting:, Open 1/3/8 turn from closed, ±¼ turn in Winter), Note:, It is not necessary to change needle settings if engine runs smoothly. Normally only the "H" needle will need adjustment from time to time and only a small amount., On-Center Mounting Holes, Side to Side:, 2.7" (70mm), On-Center Mounting Holes, Top to Bottom:, 3" (76mm), Engine Height, Including Spark Plug:, 6.5" (165mm), Length from Muffler to Carb Opening:, 5.75" (146mm), Length from Mounting Plate to Magneto Rotor:, 4" (102mm), Length from Crankshaft to Magneto Rotor:, 4.5" (114mm), ,

Fuji Imvac BT-24EI gasoline airplane engine. Electronic ignition offers full 30º timing sweep for better idle and top end performance. Dual ball bearings on both the crankshaft and connecting rod. Easy straight-out throttle linkage. Compact muffler fits into cowlings easier Walbro carburetor features easy-to-use butterfly choke valve. THREE YEAR warranty.
Requires
2-cycle oil
Battery for ignition
Engine ON/OFF switch
Propeller: 16x8, 16x10 or 16x10 carbon prop

Found 11 years, 7 months ago