SDSHobby
Electronic Digital Micrometer(0-25mm)
| Measuring range | 0-25mm 0-1’’ |
| Resolution | 0.001mm 0.00005’’ |
| Accuracy | 0.002mm |
| Power supply | one silver-oxide button battery SR44(1.5V) |
| Operating temperature | 0-+40°C |
| Storage temperature | -20-+70°C |
Specification:, Operation method:, , Notes:, 1., Trouble shooting:, , Battery replacement:, Unscrew battery lid with spanner circular back and put into the new battery(Outside for anode).,
Function
Operation
Remark
ON/OFF
Press (on/off) key. The character
opened. Which means
going in to
data output condition, press(on/off)
key again
to wipe it out
Metric/Inch
conversion
Press (inch/mm)key to be in metric
or Inch system condition
Origin
resetting
First keep measuring faces contact
to reset, then press (ZEROT) key to display origin.
Use after origin setting
Prior to use it, The origin value setting should be checked, or the wrong setting will
affect the measuring result.
.
The thimble should not be turned out from the fixed pipe to prevent the components
inside being jammed.
3.
The battery should be taken out if no used for a long time.
Trouble
Cause
Correction way
No display
1.Automatic switch off
1.Press(Hold)or (in/mm)key
.Turning micrometer
.Voltage below 1.1V
1.Replace new battery
3.Battery has not good contact
1.Keep good contact for battery
Digit display flashing
Battery
voltage too low
Replace new battery
then screw on the battery lid.
Check price and availability
Found 11 years, 7 months ago