ReadyMadeRC
GAUI GU-INS MULTI-ROTOR STABILIZER WITH GPS
| 1. Dimensions | Main controller |
| GPS antenna | 42 x 34 x 15mm |
| Weight | Main controller |
| 2. Frequency | 400Hz output to ESC |
| 3. Operating temperature | -20~80°C |
| 4. Operating modes | Rate (manual) mode, Auto balance mode, GPS positioning mode. |
| 5. Rate (manual) mode | Max angular velocity |
| 6. Auto balance mode | Max tilt angle |
| a. Hovering accuracy | Horizontal |
| b. Max yaw angular velocity | 250 degree/sec |
| c. Max tilt angle | 45 degree. |
| d. Max horizontal speed | 10 m/s,36 km/hr |
| e. Max vertical speed | 8 m/s (horizontal posture) |
| 9. Fail-safe functions | Automatic Go-Home, Signal lost Go-Home, Low voltage protection. |
| 10. Suitable wind condition | < 10 m/s |
Features:, , Specifications:, 7. GPS positioning mode:,
GAUI GU-INS supports X-type flying Quad-copter (GAUI 330X, 500X, etc…).
Optional OSD (On-screen display, optional purchase module not included) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.
Onboard USB interface connector for firmware updates.
Interface provided to connect with standard receiver and JR satellite receiver.
Easy to install and setup, no need of software on PC for adjustment.
All functions can be setup & confirmed by LED lights indication.
All in one design (combined inertial measurement unit and main controller) with simple cable wiring.
8. GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
Check price and availability
Found 11 years, 8 months ago