RCPlanet
Great Planes 25% Pitts M-12S 50cc Performance Series ARF GPMA1421
, Wingspan:, 68.5" (1740mm), Wing Area:, 1545 sq in (99.7sq dm), Weight:, 19-20 lb (8620-9070 g), Wing Loading:, 28-30 oz/sq ft (85-92 g/sq dm), Length:, 80.5" (2045mm), Airfoil:, Fully symmetrical, Center of Gravity (CG):, 6" (152mm) back from the leading edge of the center section of the top wing, Control Throws, Low Rate, Ailerons:, 3/4" (19mm) 12 degrees, Elevator:, 1" (25mm) 10 degrees, Rudder:, 2" (51mm) 10 degrees, High Rate, Ailerons:, 1" (25mm) 16 degrees, Elevator:, 1-1/4" (32mm) 12 degrees, Rudder:, 3" (76mm) 14 degrees, 3D Rate, Ailerons:, 2" (51mm) 33 degrees, Elevator:, 2-7/8" (73mm) 29 degrees, Rudder:, 6" (152mm) 30 degrees, ,
This is the Great Planes 25% Pitts M-12S 50cc Performance Series ARF Biplane. This biplane is recommended for intermediate/advanced pilots and is IMAA and IMAC-legal.
Features:
Made of balsa and plywood
Two-piece balsa and plywood wings with fiberglass struts, wooden belly pan, painted cabanes and composite tubes
Top Flite MonoKote covering
Radio compartment is plywood reinforced and easily accessible under canopy
Painted fiberglass cowl
Clear canopy with gauge detail and painted pilot bust
Painted fiberglass wheels pants
Two-piece molded landing gear, gray in color
Two foam wheels, 3.5" (89mm) diameter
Foam tailwheel, 1.5" (38mm)
Single servo rudder control, pull pull system
Four servos aileron control
Dual servo elevator control
Plywood engine mount
Approximately 30oz (850cc) fuel tank
Great Planes Heavy Duty Hardware
Building Time: Ready to fly in approximately 30 hours
Warranty (through the manufacturer): Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.
Some planes have it all and the Great Planes M-12s is one of them. Designed for 50 cc stardom, it's as notable for its distinctive style as for its spectacular MonoKote trim scheme. Send it up, and it performs with the precision for pinpoint patterns and the aerobatic might for exceptional 3D maneuvers!
Includes:
Pre-built and covered wings, fuselage and tail assemblies, pushrods, landing gear, wheels, wheel pants, cowl, fuel tank, wood servo trays, canopy, pilot bust, decal sheet, hardware package, and photo- illustrated instructions
Requires:
Engine: 3 cu in (50cc) gasoline
Radio: 7 channel minimum, 9-12 channel preferred, radio must be able to reverse each elevator servo independently, otherwise a Dual
Servo Reverser (FUTM4150) is required
Servos: Eight, seven with at least 150 oz-in of torque, throttle servo can be standard torque
Receiver Battery: 4.8V flat NiCd, at least 1500mAh
Ignition Battery: 4.8V flat NiCd, 500mAh
Propeller: To match selected engine
24" (610mm) Servo Extensions: Two
12" (305mm) Servo Extensions: Five
6" (152mm) Dual Servo Extensions: Two
Heavy Duty Switch Harness and Charge Jack
Building and field equipment
Check price and availability
Found 11 years, 7 months ago