Skip to content
Discountinued

RCPlanet

Great Planes E-Performance Ser EP 3D Reactor Bipe ARF GPMA1580


, Wingspan:, 35" (890mm), Wing Area:, 600 sq in (38.7sq dm), Weight:, 34.2 - 38.2oz (970 - 1085g), Wing Loading:, 8.2 - 9.1 oz/sq ft (25 - 28 g/sq dm), Length:, 43" (1080mm), Airfoil:, Fully Symmetrical, Center of Gravity:, 3-7/16" (87.5mm) back from the leading edge of the bottom side of the top wing measured at the fuselage, Control Throws, High Rate, Elevator:, Up & Down 9/16" (14mm), Rudder:, Right to Left 2-1/4"  (57mm), Ailerons:, Up & Down  3/4"  (20mm), Low Rate, Elevator:, 5/16" (8mm), Rudder:, 1-3/16" (30mm), Ailerons:, 3/8"  (10mm), 3D, Elevator:, 1-1/4" (30mm), Rudder:, 3-3/8" (87mm), Ailerons:, 1-1/8" (28mm), ,

Great Planes Bipe Sport. Accomplished pilots know that most planes designed for 3D maneuvers do not transition well into precision/pattern flying. But the Reactor Bipe is not like most planes. It's slightly larger and stronger than a park flyer, so it tracks better especially in windy conditions. It also offers fresh perspectives in prefabrication which enhance assembly ease and overall quality of construction. With its good looks and broad flight envelope, the Reactor Bipe is one versatile performer that's also easy on the eyes!
Features:
Construction: Laser cut balsa and ply
Wings: Balsa and plywood construction with ailerons on both wings with front and rear joiners
Covering: Factory applied Top Flite MonoKote (see comments for color)
Cowl: Factory painted fiberglass construction
Canopy: Tinted polycarbonate construction with silver trim
Battery Port: Located on underside of nose, hook and loop strap holds battery in place and allows fast and easy changes
Spinner: 1.5" (37mm) diameter white plastic construction
Landing Gear: Factory painted composite construction
Wheels: 1.75" diameter
Wheel Pants: Factory painted fiberglass construction
Aileron Control: Dual servo
Carbon fiber pushrods
Composite nylon control horns and servo arms
Decals: Die-cut and ready to peel and stick
Laser cut plywood CG balancer for easy model balancing
Building Time: Ready to fly in 4-6 hours
Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at the date of purchase.
Evolved from the original Reactor one of the best 3D/precision airplanes ever engineered! Ultra-strong, and capable of extreme maneuvers without sacrificing the ability for precision flight. Highly prefabricated with a dazzling, original trim scheme. Loaded with top-quality fiberglass parts and composite hardware.
Only 4-6 hours of easy final assembly stand between you and enjoying the Reactor Bipe's impressive flight repertoire. In addition to a low parts count, this model comes with:Motor box installed
Factory-mounted cowl with magnets installed
All control horn locations laser cut for press-and-glue simplicity.
A CG balancer is included with the Reactor Bipe, so that you can properly set and balance your model to match your flying style.
You'll get optimum performance out of your Reactor Bipe when you equip it with ElectriFly's RimFire™ 35-36-1200 out-runner brushless motor.
The compartment's roomy dimensions make it easy to access for quick battery changes. Quality lightweight materials fiberglass wheel pants, landing gear, cowl and airfoil-shaped upper wing pylon.
Not only is the Reactor Bipe expertly covered in metallic trim, it features an attractive, contemporary scheme. Die-cut decals are included for peel-and-press customization. While still being compact enough for easy transportation and spontaneous flying at a park or field, the Reactor Bipe is slightly larger and stronger than typical park flyers in its class.
Includes:
Pre-built and covered wings, fuselage and tail assemblies, pushrods, fiberglass cowl, wheel pants, molded composite main gear, 1.6"
(41mm) diameter foam main wheels, 1.5" (37mm) diameter spinner, hardware package and photo-illustrated instructions
Requires:
Radio: 4-channel with micro receiver
Servos: Four micro, Futaba S3114 Digital Micro High-Torque recommended
12" (300mm) Servo Extension: Two
Y-Harness: One
Motor: Outrunner brushless
Electronic Speed Control: 35A brushless compatible
Battery: 11.1V LiPo, at least 1200mAh
Battery Charger: LiPo compatible with balancing capability or separate balancer
Propeller: 11x7
Building and field equipment


Check price and availability


Found 11 years, 8 months ago



Related Products


Great Planes RealFlight 6 Mode 2 w/Heli Mega ...

View
Great Planes RealFlight 6 Mode 2 w/Heli Mega Pack

Great Planes RealFlight 6 Mode 2 w/Airplane Mega ...

View
Great Planes RealFlight 6 Mode 2 w/Airplane Mega Pack

RealFlight G4 Expansion Pack 5

View
RealFlight G4 Expansion Pack 5

RC Plane Boat Car Body Painting Great Sparkle ...

View
RC Plane Boat Car Body Painting Great Sparkle Printed Masking Tape

Master Airscrew - Razor Plane

View
Master Airscrew - Razor Plane
BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby