RCPlanet
Great Planes Giant Scale 38% Extra 330S ARF GPMA1290
, Wingspan:, 110.5" (2805mm), Wing Area:, 2279 sq in (147 sq dm), Weight:, 36 - 38lb (16.3 - 17.2kg), Wing Loading:, 36 - 38 oz/sq ft (111 - 117g/sq dm), Length:, 103" (2616mm), Airfoil:, Fully symmetrical, Center of Gravity:, 5-3/4" (146mm) Back from the wing's leading edge measured at the wing tips, Control Throws, Low Rate, Ailerons:, Up & Down 1-3/8" (35mm), Elevator:, Up & Down 1" (25mm), Rudder:, Right & Left 5" (130mm), High Rate, Ailerons:, Up & Down 2" (50mm), Elevator:, Up & Down 1-3/4" (45mm), Rudder:, Right & Left 7" (180mm), 3D, Ailerons:, Up & Down 3-1/2" (90mm), Elevator:, Up & Down 4-3/4" (120mm), Rudder:, Right & Left 8" (200mm), ,
This is the Great Planes Giant Scale 38% Extra 330S ARF Aerobat. This airplane is recommended for advanced pilots and is IMAA Legal and fully 3D and IMAC Capable.
Features:
Built-up balsa and ply airframe, full deflection throws, sheeted foam turtle deck with balsa sheeting, and double beveled control surfaces
Two-piece wing panels with aluminum joiner tube
Two-piece horizontal stabilizer with carbon fiber joiner tube
Radio compartment is located under the canopy and is plywood reinforced
Top Flite MonoKote covering
Carbon-fiber/fiberglass cowl, painted to match covering
Cockpit has instrument panel and painted pilot head
Clear canopy, integrated with hatch, removal allows access to electronics and battery packs
Carbon-fiber landing gear
Du-Bro rubber main wheels, 5" (217mm)
Adjustable aluminum tailwheel
Painted fiberglass landing gear fairings
Four servo aileron control, pre-hinged with giant scale hinge point hinges
Lightweight painted fiberglass pilot figure
49oz (1450cc) Fuel tank
Polished aluminum spinner, 4" (102mm) diameter
Bolt-on stabilizer halves with prebuilt servo pockets, carbon fiber tubes
Pull-pull rudder design with dual ball bearing supported tiller arm, three servo set-up, and aluminum servo tray
Complete giant scale hardware set with all-aluminum servo arms (normally an extra-cost add-on)
Building Time: Ready to fly in 6-8 hours
Warranty (through the manufacturer): Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at the date of purchase.
This is the biggest ARF in Great Planes history and the remarkable product of over two and a half years of research and development! The Great Planes Extra 330S commands the eye whether it's in the sky or on the ground, simply by size alone. But true to its name, the Extra 330S goes above and beyond, with a hardware package rich in unexpected extras and the assembly ease previously found only on much smaller ARFs!
Includes:
Pre-built and covered wing and fuselage sections, aluminum spinner, instrument panel, wheel pants, wheels, all hardware including aluminum servo arms and servo tray, pilot head, and manual
Requires:
Engine: (120 -150 cc) gasoline, Desert Aircraft 150cc recommended
Propeller: 30x12 (XOAQ3012)
Radio: 5-6 channel with mixing capabilities
Misc. Items: CA and epoxy glue, gasoline fueler valve, 1/2" foam rubber padding, 3' medium gasoline tubing, fuel filter, propeller, decals, building and field equipment.
Servos: 4-Aileron servos with at least 190 oz-in torque (FUTM0215)
3-Rudder servos with at least 120 oz-in torque (FUTM0235)
2-Elevator servos with at least 300 oz-in (FUTM0216)
1-Thottle servo medium torque (FUTM0075)
Servo Synchronizer: FUTM4155, for the three rudder servos
Two 6" (150mm) Heavy Duty Dual Servo Extension: (FUTM4135) from receiver for ailerons
Two 6" (150mm) Heavy Duty Servo Extensions: (HCAM2701) for throttle servo and rudder synchronizer
Two 12" (305mm) Heavy Duty Servo Extensions: (HCAM2711) for inboard aileron servos
Two 36" (915mm) Heavy Duty Servo Extensions (HCAM2726) for outboard aileron servos
If connecting elevator servos to separate channels in receiver and using mixing in transmitter the following extensions will also be required:
Two 6" (150mm) Heavy Duty Servo Extensions: (HCAM2701)
Two 12" (305mm) Heavy Duty Servo Extensions: (HCAM2711)
Two 36" (915mm) Heavy Duty Servo Extensions (HCAM2726)
If connecting elevator servos to the same channels in receiver the following will be required:
Two 36" (915mm) Heavy Duty Servo Extensions (HCAM2726)
Servo Reverser: FUTM4150
Receiver Battery: At least 3000mAh capacity (HCAM6355)
Two Heavy Duty On/Off Switches: Ignition battery and radio system
(HCAM2761)
Check price and availability
Found 11 years, 7 months ago