Discountinued
ReadyMadeRC
HOBBYWING FLYFUN 6A BRUSHLESS SPEED CONTROL
1.1 Output | Continuous 6A, Burst 8A up to 10 Secs. |
1.2 Input Voltage | 2 cells lithium battery or 5-6 cells NiCd/NIMh battery. |
1.3 BEC | 0.8A / 5V (Linear mode). |
1.4 Max Speed | 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. |
(BLM | BrushLess Motor) |
1.5 Size | 24mm (L) * 12mm (W) * 6mm (H). |
1.6 Weight | 6g. |
2.1 Safety Arming Feature | Regardless the throttle stick position, the motor will not spin after battery connected. |
Brake Setting | brake enabled / brake disabled. |
Battery Type | Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). |
Low Voltage Protection Mode(Cutoff Mode) | Gradually reduce the output power / Cutoff the output power. |
Low Voltage Cutoff Protection Threshold (Cutoff Threshold) | low / medium / high. |
Start Mode | normal / soft / very soft. |
Timing | low / medium / high. |
Reset | reset all the programmable items to their default settings. |
2.4 Full Protection Features | Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection. |
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters., 2.3 Programmable Items:,
1 Specification
2 Features
3 Advantages
3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is helpful for getting a super current endurance capability.
3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
3.4 Compatible with Hobbywing's Program Card
Check price and availability
Found 7 years, 7 months ago