Hobby-Lobby
Habu 32 DF ARF (OVERSIZE)
| Wingspan | 40.5 in. (1030mm) |
| Overall Length | 49.5 in. (1250mm) |
| Speed Control | 80 Amp brushless |
| Scale | Sport Jet |
| Experience Level | Advanced |
| Assembly Time | 10-15 Hours |
| Flaps | Yes |
| Retracts | Optional |
| Low | 7mm Up/Down, 10% Expo; High |
| Low | 8mm Up/Down, 10% Expo; High |
| Low | 15mm Left/Right, 5% Expo; High |
| Approx. Flying Duration | 4.5 minutes |
| Recommended Environment | Outdoor |
Habu 32 DF ARF Highlights:, Painted fiberglass fuselage and vertical stabilizer, Technical Specifications:, Habu 32 DF ARF Specs:, Wing Area:, 392 sq in. (25.3 sq dm), Flying Weight:, 7.05 - 7.40 lbs. (3.20 - 3.35 kg), Motor Size:, DF 32 Brushless Motor, 2150Kv, Radio:, 5+ Channel Radio system, Servos:, Micro Servos (8 required), Recommended Battery:, 6S 22.2V 5000mAh 30C LiPo, Trim Scheme Colors:, Ultracote - Deep Red, Silver, Pearl Charcoal, CG (center of gravity):, 100-115mm back from the leading edge at wing root, Control Throw (Ailerons):, Control Throw (Elevator):, Control Throw (Rudder):, Control Throw (Flaps):, 11mm take off and cross wind landing; 25mm landing,
Taking ducted fan performance and engineering to new heights
E-flite takes ARF ducted fan performance and engineering to new heights with the Habu 32 DF. Designed around the E-flite Delta-V® 32 80mm fan unit and 2150Kv DF32 brushless motor, its hyper-efficient intake and exhaust ducting allows this potent combo to produce large amounts of thrust when powered with a high-C 6S Li-Po pack. And it does so without resorting to drag-inducing cheater holes. The result is a sport EDF with exhilarating speed that will give even experienced jet jockeys goose bumps.
As the first Platinum Series E-flite® ducted fan, the Habu 32 DF also boasts a level of fit and finish that is every bit as impressive as its performance. Its sleek fiberglass fuselage comes pre-painted and integrates the vertical stabilizer. The fully-sheeted wings and horizontal stabilizers are reinforced with carbon blade spars and covered with genuine UltraCote®. The control surfaces are hinged for you. Just add the optional E-flite electric retracts (sold separately), and you've got a sport jet that truly stands out from the crowd.
Sheeted balsa wings and horizontal stabilizers covered in genuine UltraCote
Wings and Stabilizers are removable using carbon blade spars and aluminum sockets for easy transport
Pre-hinged control surfaces
Flap Ready
Hyper-efficient duct design - no cheater holes
Machined aluminum wheels
Optional landing gear doors included
Access hatch for the fan unit and a canopy hatch for easy battery access
Quick-release access hatch/cockpit deck
Check price and availability
Found 11 years, 9 months ago