ReadyMadeRC
RMRC 5V/12V Dual Step Down Regulator
| Max Input | 6s LiPo battery |
| Output (Red) | 12v, 1a (1.5A if cooled) |
| Output (White) | 5v, 1a (1.5A if cooled) |
| Weight | 12.2g (including wires and connectors) |
| Unit Size (without wires) | 39x18x7mm |
| Efficiency | 85-90% at typical current draws depending on voltage input. |
Specifications:, , Min Input: 2s LiPo battery (12V output line will output the input voltage minus approx 0.5V when it is below 12.5V),
Introducing the RMRC 5v/12v Step Down Regulator!
The high efficiency, low noise regulator accepts up to 6S voltage input, and provides filtered 12V and 5V output at 1.5A max per channel. It's perfect for powering most FPV gear, and also powers your receiver on multirotors with “Opto” ESCs, eliminating the need for an external BEC.
Note that the 12V regulator
does
not
boost the voltage
. However, the
RMRC Step Down Regulator
has a unique
Low Voltage Loss
feature that drops the regulator’s output by only about 0.5V if you are using a 3S pack operating below 12.5V. For example, if your 3S pack is at 11.5V, the regulator outputs about 11V. Other non-boost switching regulators typically drop the output voltage by 1.3V or more.
Includes short circuit and over-temperature shut down protection.
Check price and availability
Found 7 years ago