R2Hobbies
4 Channel RC EP 3M Gliderman ARF Thermo Glider Sailplane
| Length | 1460mm |
| Wing span | 3000mm |
| Wing Type | Self-design |
| Wing Area | 76.5 dm. sq |
| Wing Load | 34g / dm sq. |
| Flying Weight | 2600g |
Number of Servo:,
4 Channel RC EP 3M Gliderman ARF Thermo Glider Sailplane
Model Number : rcpl0401001
The feature of this glider is small in packing! The main wing is assembled with 4 panels and the fuselage in 2 pieces which can dramatically make the packing much smaller than usual glider with 3 meters wingspan.
The angles of the main wing panel are NOT at the conjuctions which means that there is no hassle with the installation when assemble the main wing. The angles have been set! Easy for customers!
As the main wing is long, we have already install the servo wires before putting the covering to the frame. Easy for customers!
.As usual, this glider fuselage is made of light but durable epoxy fiberglass with high quality balsa wood covered with top level Oracover plastic film. It is 100% fulfil safety requirement and no trouble with copy right issue about chinese made covering.
The top and bottom face of the wing with different color pattern for easier recongising the direction of the glider. Motor, ailerons and tail wing are fully controllable!
Recommended motor for this glider is 850rpm/v D3648 brushless motor with 60A ESC and 12 x 13" folder propeller. They are also available upon request!
Features:
4 Panels Main Wing
Fuselage can be disassembled in 2 pieces.
No hassle with the main wing angles as all pre-set!
Much smaller packing comparing with other 3 Meters Gliders!
Rear in the market!
Strengthen fuselage - with 4 more layers of fiberglass clothes.
Excellent outlook - carbon fiber canopy !
The Streamlined fuselage is made of fiberglass and comes with control-rods already factory-installed.
Conventional Rib & Spar frame structure wing and tail-surfaces, covered with quality plastic film. Easy to assemble and repair. And those wings are made of high quality of balsa wood. It provides very light weight for the whole plane.
Easy to assemble and dis-assemble for transportation.
Hands-off stability when trimmed properly.
Most of necessary components(screws & servo horns) are included.
Oracover plastic film!
4
Wing Material :
Balsa Wood
Fuselage Material :
Epoxy
Propeller :
16 x 13"
Gross Weight :
4781g
Items included:
4 Channel RC EP 3M Gliderman ARF Thermo Glider Sailplane
Carbon Fiber Propeller
Carbon Fiber Spinner
Servo extension wires
Items NOT included:
Radio Gear
Brushless Motor
ESC
Servos
Battery
Check price and availability
Found 11 years, 9 months ago