HobbyKing
F-TEK 31AP Flight Stabilization Controller & F-TEK OSD Combo
7 reviews
Input voltage | 4.0 ~ 6.0V |
Current draw | 50mA (5V) |
Size | 47x27x20 mm |
Weight (excluding wires) | 25g |
Temperature range | -25 ° C ~ +70 ° C |
Maximum rate of rotation | ≤ 2000 ° /s |
Input voltage | 3.0 ~ 3.3 Volt |
Current draw | 60mA (3.3V) |
Size | 32x32x10mm |
Weight (excluding wires) | 22g |
Temperature range | -25 ° C ~ +70 ° C |
http | //www.feiyu-tech.com/ |
Features:, • Level flight - When stabilization is activated, the F-TEK 31AP will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantageous as it makes flight easier and increases the student pilot's self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., F-TEK 31AP Specs:, F-TEK OSD Specs:, Package Includes:, F-TEK 31AP Flight Controller,
The F-TEK 31AP
is an inertial attitude measurement instrument used for automated stabilization of fixed wing model aircraft and simple three axis camera gimbals It features an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space.
The F-TEK 31AP also incorporates an accurate barometric pressure sensor. At start up, the take-off air pressure is measured, providing the autopilot with an accurate relative height data.
This flight controller supports the use of a
GPS module which enables the autopilot to calculate the flight course and exact location of the aircraft. This allows for precise GPS positioning as well as "return to home" functionality. If the FY31AP is not connected to a GPS module, the autonomous flight system cannot be engaged and it will function purely as a flight stabilizer.
The F-TEK OSD
overlays flight telemetry information onto your video image. The telemetry information displayed includes flight altitude, flight speed, flight direction, home direction and so on. You also can save the telemetry information to a MICRO SD card (available separately). The
F-TEK OSD/F-TEK 31AP combo includes the F-TEK 31AP to display autopilot telemetric data, and a GPS receiver to display positioning data.
F-TEK OSD automatically adapts to either PAL or NTSC video input and confirms if there is a MICRO SD card or not. The adaptive processes are within about 20 seconds.
Once the input video is detected (even if there is interruption to the video signal), the telemetry data of the F-TEK OSD will continue to be transmitted via the video stream.
• Emergency Recovery - If you lose orientation release all control sticks, maintain throttle and switch ON the F-TEK ...
Check price and availability
Found 5 years, 5 months ago
at
HobbyKing