Mini Ultra Stick

Discountinued

Hobby-Lobby

Wingspan	38.75 in (985mm)
Overall Length	34 in (865mm)
Prop Size	10x7 - 11x7
Hardware Included	Yes
Speed Control	20A Brushless
Flaps	Yes (optional)
Approx. Flying Duration	10-20 minutes
Scale	Park Flyer
Approx. Assembly Time	1-2 hours
6.5	1 when using Park 400 Brushless Inrunner

Mini Ultra Stick ARF Features:, Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer, Needed to Complete:, Brushless Motor, Brushless ESC, 4+ Ch Radio, 4 Sub-micro Servos, Servo Extensions & Y-harness, 4 to 6-Ch Receiver, LiPo Battery, LiPo Charger, CA, Propeller, Technical Specifications:, Mini Ultra Stick ARF Specs:, Wing Area:, 325 sq in (21 sq dm), Flying Weight:, 22 - 25 oz (625 - 710g), Motor Size:, Park 400 Inrunner or Park 450 Outrunner, Radio:, 4-channel or greater (7-channel for quad flaps), Servos:, 4 sub-micros (6 sub-micros for quad flaps), Trim Scheme Colors:, UltraCote Fluourescent Blue, Flame Red, Transparent Red & White, CG (center of gravity):, 2.50 in (63mm) behind the leading edge, Recommended Battery:, 2100 mAh 3-Cell 11.1V Li-Po, Control Throw (Ailerons):, 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate, Control Throw (Elevator):, 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate, Control Throw (Rudder):, 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate, Gear Ratio:,

Extremely Versatile and An Absolute Blast to Fly
Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick's fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.

95% factory-built; get flying in 2 hours or less

Lightweight balsa and plywood construction

Two firewall options to use a variety of motor sizes, types & brands

Includes molded firewall stick mount

Control surfaces have factory-installed hinges and control horns

Bolt-on tail requires no gluing and secures with two lock nuts

Optional quad-flap configuration

Tough, lightweight aluminum landing gear that's factory-assembled and tall enough to accommodate larger prop sizes

Covered in genuine Hangar 9 UltraCote

Great match for E-flite Park 450 Outrunner Brushless Motor

Easy access top battery hatch

Design based on Hangar 9's popular line of Ultra Sticks