ReadyMadeRC
Penguin V2 Kit (Hardware Included, Customizable Electronics)
| ATTENTION | According to |
| Wingspan | 1720MM/67.7inch |
| Length | 1230MM/48.5inch |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless motor M2220 Kv1350 or M2815 KV1280 |
| ESC | 40A for M2220 or 60A for M2815 |
| Servo | 3pcs 17g servo+ 1pcs 9g servo. |
| Battery | Li-Po 11.1V 2400 mAh for M2220 and 5000mAh for M2815 recommended |
| Static Thrust | Motor M2220 1.5Kg/53.0oz. |
| Payload | 600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight) |
| Material | EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe |
| Hitec Servo Package | 3 HS81, 1 HS65HB servo |
| Hitec Metal Gear Servo Package | 3 HS82 MG, 1 HS65MG Servo |
| Part No | FUP1202 Penguin Kit |
ARF Weight: 0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Options include:, Motor/ESC:, , Servos:, , Forum Discussions:, RCGroups, WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount. There are a few choices sold separately:, , Finwing Penguin Features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,
UN1133 shipping regulations, the glue contained in t
his product
cannot
ship via Air service.
We will remove
the glue for Air or International orders.
Penguin Kit (Airframe Only) with optional motor & servos
Motor M2815 1.95kg/69oz,
Max.flight weight more than 2.2kg/77.0oz
No motor/ESC
Finwing M2210 Motor with 40A linear BEC ESC
Finwing M2880 Motor with 60A switch mode BEC ESC
Custom ReadyMadeRC Penguin Power Package with Himax Motor and 50A TB ICE ESC (very minor modifications required of the wood motor mount to allow motor shaft to spin freely)
No Servos Included
Stock Finwing
3pcs 17g servo+ 1pcs 9g servo
Great review of the V1 Penguin on
Model Aiplane News
!
FPVLAB
Standard Pan/Tilt
Pro Pan/Tilt
Basic Pan/Tilt
GoPro Pan/Tilt
FinwingHobby Universeye Penguin Kit
Pre-assembled EPO Mainwing
EPO fuselage,Horizontal wing and Vertical Wing
Propeller 9060 1PCS
All Aluminum and wooden reinforcement parts has been included
Magic Velcro and foam glue
The first FPV specific airplane design with rolling takeoff capabilities
Large fuselage space for lots of equipment!
Transparent canopy design allowing you to protect your FPV camera from the weather while offering a crystal clear view.
FPV Camera on top, and camera opening on the bottom of the fuselage (optional plastic dome available for bottom). Great for aerial photography, you can place a high definition camera on the bottom
pointing down, or an HD camera can be mounted on the outside of the canopy for a clear view forward.
Front gear and tail gear design, runway take off and landing available. Ground handling great with just rudder control.
Metal servo horns and strong hardware for strong and stable flight control
Large battery mounting aread with hook and loop tape, plus side hook and loop mounts for easy equipment mounting.
Designed with great premade positions to place your GPS, video transmitter, radio transmitter
Rear mounted propeller is out of view and protected from those "rough" landings.
Penguin User Manual
Check price and availability
Found 7 years ago